Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NEEDED asap

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 17
Joined: Sun Jan 18, 2009 2:16 pm
Location: geelong

NEEDED asap

Post by dmrbikes »

HEY GUYS I HAVE A 1987 DIESEL ROCKY AND I AM AFTER THE FOLLOWING TRANSFER CASE GEARS..

IDLER GEAR

HIGH RANGE OUT PUT SHAFT GEAR...

IF ANY BODY HAS ANY OR KNOWS WHERE I CAN GET THEM PLEASE GET BACK TO ME ASAP...
THANKS
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

I needed the hi rage output gear couldnt get one anywhere.

Had to get a whole transfer.
[color=#FF4000][/color]89 rocky V6 2"efs adj/sway&panhard
Posts: 312
Joined: Fri May 05, 2006 9:35 pm
Location: Wollongong, NSW Aus

Post by Doc_Acos »

I have heard you can get gear sets from Bursons, otherwise you could probably get a gearbox company to rebuild it can be exxy though.

If you call around some gear makers, some of the smaller ones can knock them up for you pretty cheaply if it is a standard tooth size, etc. Although they would need the gears to duplicate them.

Worth a phone call or two.

Picking them up from a wrecker is a pain these days, is they deal in Rocky parts, they know how much they are worth....
http://www.bushranger.com.au/

'84 F70 Rocky :)

'97 Paj GLS LWB - HEHE

RIP ... My Feroza II SXP
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Does your transfer case have a manually engaged 4x4 low, or push button?

Either way should have the full transfer here, might be willing to sell just the gears.
60 + Turbo, 33"s :armsup:
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

The push button and manual select run the same gearset.

I just changed mine fron button to manual.


Best thing i ever did. :lol:
[color=#FF4000][/color]89 rocky V6 2"efs adj/sway&panhard
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

No worries, I thought they had different ratios.
60 + Turbo, 33"s :armsup:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests