Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting a snorkel .... GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 13
Joined: Sat Jul 21, 2007 10:00 pm
Location: CENTRAL COAST

Fitting a snorkel .... GQ

Post by mrfrontmount »

Hi I have just bought a snorkel for my gq . Just wanting to know if there are any tips around on how to fit and seal correctly .
Thanks
Adam
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

you need the stencil for that snorkel.....tell us what type and someone maybe able to help
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 13
Joined: Sat Jul 21, 2007 10:00 pm
Location: CENTRAL COAST

Post by mrfrontmount »

I bought a new kit off eBay and it has a template for fitting I am more wondering what tools will be needed and is it hard to do etc
Thanks
Adam
Top
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Contact:
Contact Vanne

Post by Vanne »

depends, if you wanna do it good, youll need a hole saw, if you wanna go dodgy brothers, all thats required is a drill, hacksaw and hammer.

do yerself a favour, if you dont have a hole saw, take it and pay some poor mofo to install it for ya.

Just finished mine last week, would have gotten some poor sucker to do it if id known how much screwing around it is.

cheers and good luck.

I was gonna take some pics, but couldent bring myself to post em due to the massivly rough job i was doing.

:armsup:
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

good silcone and steel clamps
Top
Posts: 156
Joined: Tue Feb 21, 2006 11:41 am
Location: NSW......West of the Sandstone Curtain

Post by ST391GQ »

money_killer wrote:good silcone and steel clamps
X2 !!!
Can use good quality stainless clamps too (better)....but not those cheapy ones with stamped see-thru threads that actually cut into rubber/silicone and stuff it!!
I position my template with auto tape...centre punched all the holes...checked and rechecked it...removed template...n took it to my local 4wd store...n they did all the holes for 20 bux...and then I took it home and cleaned them all up and repainted the bare metal...saved a heap of $$...and I knew it was done properly too. Snorkel is a piece of P**s to fit once all this is done.

Cheers Keith
P/S...actually....clamps used for fuel injection lines are THE BEST....but not sure if yu can get them big enuff for this job tho....
Nuthin is ever the same once I own it !!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 149 guests