Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 TDi gu engine rebuild

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 15
Joined: Tue Oct 04, 2005 8:11 pm
Location: Croatia (EUROPE)

Contact:
Contact zenteren

2.8 TDi gu engine rebuild

Post by zenteren »

Where to find engine rebuild kit for RD28ETi? I think my engine as almost on the end....hard to start it even when hot.
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

isn't that the motor that has starting problems and there is an advance plate or top plate to fix that problem
Top
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

In my expierence these engines are a hand grenade. Constantly doing heads etc. better off to sell the vehicle than shell out good coin on an engine thats not really all that flash in the first place.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Check ebay as the link on Patrol forum.
Top
Posts: 15
Joined: Tue Oct 04, 2005 8:11 pm
Location: Croatia (EUROPE)

Contact:
Contact zenteren

Post by zenteren »

I've found out that compression test isn't that good as the first time. My EGR was sticking open all the time...now it's blocked but there is possibility that there are carbon deposits on valve seats....or maybe the piston rings are damaged after all. I'll open engine next week to find out details. Just want to make sure that I will have parts.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 51 guests