Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flipping Draglink with Highsteer

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Flipping Draglink with Highsteer

Post by Weiner »

Hi guys,

Just getting the car finished for the weekend and need to know if there is enough movement in the ball joint if I put the ball joint end of the draglink on the top of the pitman arm.

the Draglink touches the tie rod and I need a bit more clearance and I think this will do it, but just want to make sure I won't run out of movement.

Cheers.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Pitman arm is too long it sounds like. Try using a 2wd one.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

the tapered hole in the pitman arm would be around the wrong way, would it not?
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Thats what i would think, no chance of it fitting.
Top
Posts: 125
Joined: Sun Jul 08, 2007 7:15 pm
Location: Albury

Post by Nuckingfuts »

80's_delirious wrote:the tapered hole in the pitman arm would be around the wrong way, would it not?
X2 it wont work, taper would be wrong way
www.trailtrack4x4.com
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

I realised that when I took the arm off and tried it, thanks anyway guys :D

Might try a 2wd one of a flat pitman arm.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests