Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hulsty wrote:Saw a full set of the you beaut ones come loose last weekend. They were installed and torqued to spec, all came loose.
also only been on the car a week, which was not daily driven
I'd suggest that if all 4 came loose then they were fitted incorrectly or the torque specs they were tightened to were incorrect.
Maybe there was mud on the hub before the spacer was fitted... Maybe they weren't tight enough...
I've run 1.5" spacers on my Zook for about 18 months.. I check them regularly and have NEVER found one loose.
hulsty wrote:Saw a full set of the you beaut ones come loose last weekend. They were installed and torqued to spec, all came loose.
also only been on the car a week, which was not daily driven
I'd suggest that if all 4 came loose then they were fitted incorrectly or the torque specs they were tightened to were incorrect.
Maybe there was mud on the hub before the spacer was fitted... Maybe they weren't tight enough...
I've run 1.5" spacers on my Zook for about 18 months.. I check them regularly and have NEVER found one loose.
X2
I ran them for 12 months permenently but I used locktight and they were just as tight when I removed them a year later.
