Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CAV Filters

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

CAV Filters

Post by CWBYUP »

I have been wondering about cav filters for a while and don't know the differance between a good one and a bad one.

Is something like in the link below ok ?

http://cgi.ebay.com.au/CAV-Fuel-Filter- ... 1|294%3A50
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

I think they work pretty well, I'm not sure how they compare to the standard Nissan filter though?
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

I run 2 CAV filters between tank and OE filter. At around $10 for a 2132, instead of around $60 for an OE filter, it makes sense.
Mud makes excellent toothpaste.
Top
Posts: 193
Joined: Mon Oct 31, 2005 6:21 pm
Location: BEECHWORTH NTH EAST VIC.

Post by GUte »

I have been told by the specialist who rebuilt my pump that it needs filtering down to 4 micron as the Nissan filter apparently does.
The Delphi/Cav 296 filters for less than $7.00 do also. Baldwin I don't know.
I was also told that the Ryco filters only filter to approx. 12-14 micron hence the issues with my pump.
That kit is a good investment.

Al.
AL

00 GU ST coil cab
93 GQ RX TB42 turbo wagon
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

What about the wiring and float for the water trap in the standard filter, can you run it in the CAV filter?
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

chunks wrote:What about the wiring and float for the water trap in the standard filter, can you run it in the CAV filter?
my switch didn't float in water, I have been running a CAV for years now with now issues.

Just lift the bonnet periodically and inspect the bowl.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests