The mq started normally, but when it was switched off, it wouldn't turn off. The motor kept running as if the keys hadn't been switched off. In order to turn the car off, we could either manually control the pump or disconnect the 24V regulator. With the regulator disconnected the car turned on and off normally, except that it did not charge. But when the regulator was connected, it seemed to back feed the loom and keep the ignition energised even when it was switched off. If the regulator was left connected, even with the car off, the charge light remained on, and various other lights and instrumentation remained energised.
With the car running and the regulator connected, the car charged and operated normally!
Has anyone got any ideas?
Cheers
Aaron
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ shortie electrical dramas...
Moderator: -Scott-
MQ shortie electrical dramas...
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
Who is online
Users browsing this forum: No registered users and 12 guests