Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

92 vitara diffs

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 7
Joined: Mon Jun 08, 2009 3:28 pm
Location: gosford

92 vitara diffs

Post by 92vitara »

Hey guys only new to this site and not sure where or how to use this site ( computer illeterate ) basically i have 92 vitara 1.6 carb 3inch body lift, 3 inch spring lift 2 inch wheel spacers and hancook 31in muds and want to know whats out there in the way of lockers for these little bad boys to help out a little more any advise well be gratefull cheers guys

mick
Top
Posts: 189
Joined: Sun May 18, 2008 11:41 am
Location: Anywhere

Post by lockdup »

ARB rear air lockers are availiable for them both front and rear. Also most auto lockers mate. It all depends on how much you want to spend
5.12, 34" SUPERSWAMPER, REAR AIR LOCKED
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

If you want to run a front locking diff of any description you will need to source a steel front axle housing and 3rd member from a manual V6 grand vitara or XL-7.

with your setup as described you will break the front alloy housing easily.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 7
Joined: Mon Jun 08, 2009 3:28 pm
Location: gosford

Post by 92vitara »

thats a good starting point saved some coin there with that advice so i take it the grand and xl are same diff only steel right? also whats a 3rd member?

cheers
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

motor= 1st member
transmission/ transfer= 2nd member
diffs= 3rd member
michael
Top
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

11_evl wrote:motor= 1st member
transmission/ transfer= 2nd member
diffs= 3rd member
isn't the 3rd member what the yanks call a pinion carrier, it's the bit that holds the ring & pinion.

there are 2 types of steel carriers from the GV's one will bolt straight up & one will require some fab work

this thread shows the 2 different types of mounts.
http://www.outerlimits4x4.com/ftopic144145-120.php
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests