Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what length coilovers
what length coilovers
Just a quick question about coilovers in a GQ UTE.
im slowly building a winch challenge truck, and am thinking about putting coilovers in the rear. Im wondering what length do most guys run?
I've tried the search but didnt come up with much....any info would be great.
im slowly building a winch challenge truck, and am thinking about putting coilovers in the rear. Im wondering what length do most guys run?
I've tried the search but didnt come up with much....any info would be great.
Hey mate, I've done some searching and found a few examples to look at.
Here is a truggy build up in the members thread, it's running 16 inch coilovers all round. Read the whole thread and couldn't tell what size tire he is running. http://www.outerlimits4x4.com/ftopic128490-0-asc-0.php
This is a patrol on mog diffs with 18 inch coilovers in the rear. This setup is for TT tho, not a winch challenge so you wouldn't need that much travel or lift. http://www.outerlimits4x4.com/ftopic174 ... =coilovers
You've seen MUD 000 's rig, it's got coilovers in the rear, don't know what size. http://www.outerlimits4x4.com/ftopic595 ... =coilovers
This MQ buildup in the US has 16 inch coilovers in the rear. I think it might be running 40" tires. http://www.outerlimits4x4.com/ftopic20786-150.php
Also have a look here. http://www.outerlimits4x4.com/ftopic167 ... =coilovers
Hope those links help. Aside from that couldn't find much else out. The question has been asked several times with not much response.
http://www.outerlimits4x4.com/ftopic164 ... =coilovers
Good luck mate.
Jeremy
Here is a truggy build up in the members thread, it's running 16 inch coilovers all round. Read the whole thread and couldn't tell what size tire he is running. http://www.outerlimits4x4.com/ftopic128490-0-asc-0.php
This is a patrol on mog diffs with 18 inch coilovers in the rear. This setup is for TT tho, not a winch challenge so you wouldn't need that much travel or lift. http://www.outerlimits4x4.com/ftopic174 ... =coilovers
You've seen MUD 000 's rig, it's got coilovers in the rear, don't know what size. http://www.outerlimits4x4.com/ftopic595 ... =coilovers
This MQ buildup in the US has 16 inch coilovers in the rear. I think it might be running 40" tires. http://www.outerlimits4x4.com/ftopic20786-150.php
Also have a look here. http://www.outerlimits4x4.com/ftopic167 ... =coilovers
Hope those links help. Aside from that couldn't find much else out. The question has been asked several times with not much response.
http://www.outerlimits4x4.com/ftopic164 ... =coilovers
Good luck mate.
Jeremy
10 inch front, 12 inch can be fitted but more work, I was recommended 10 inch. Rear 12 inch for standard suspension arms 14 if you are running 4 link. I'm running 12 inch in the rear.
Have a look at my build thread may give you some ideas.
Have a look at my build thread may give you some ideas.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
14" rears if using standard arms will work well, and can be set up so as the roll centre stays where you need it to mkae it handle, without going to high.
14" stroke coil overs are aprox 1 m long, we have found that 12" stroke fronts are about as long as you want for this type of truck set up also, placed correctly for up, and down travel.
Below is some 14" rears, smoothies [coil over without coils ]
And triple bypass fronts, my old GU.
Those lengths give you about as much usable travel as you can have, and still have the car drive and handle well.
14" stroke coil overs are aprox 1 m long, we have found that 12" stroke fronts are about as long as you want for this type of truck set up also, placed correctly for up, and down travel.
Below is some 14" rears, smoothies [coil over without coils ]
And triple bypass fronts, my old GU.
Those lengths give you about as much usable travel as you can have, and still have the car drive and handle well.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Thanks for the reply's
i was thinking 14" coilovers for the rear, i know a lot of people use King Coilovers so i suppose they must be good....
How would a Fox Airshock or similar perform on a winch challenge truck? are they more prone to overheating than a coilover?
also does anyone know who would be good to talk to about spring rates??
Thanks again, Paul
i was thinking 14" coilovers for the rear, i know a lot of people use King Coilovers so i suppose they must be good....
How would a Fox Airshock or similar perform on a winch challenge truck? are they more prone to overheating than a coilover?
also does anyone know who would be good to talk to about spring rates??
Thanks again, Paul
Air shocks, no......
Coil overs are great, and valving easily chnaged by someone handy at home, regassing should only cost $25 from any good offroad bike shop, all parts are availale as a spare part.
Spring rates can be set, and primary and secondary rates how you require, with adjustment on the slider for when you want primary, and secondary rates to come into play.
If it were me, i would go bypass adjustable, and coil over, dearer, but much more tunable.
Coil overs are great, and valving easily chnaged by someone handy at home, regassing should only cost $25 from any good offroad bike shop, all parts are availale as a spare part.
Spring rates can be set, and primary and secondary rates how you require, with adjustment on the slider for when you want primary, and secondary rates to come into play.
If it were me, i would go bypass adjustable, and coil over, dearer, but much more tunable.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Darren above would be the place to start.OL GQ UTE wrote:yeh i am pretty much set on using coilovers, just thought id ask the question about air shocks.
i will look into running bypass adjustable and coil overs...
where is a good place to buy King or Fox Coilovers?
http://www.auto-craft.com.au/autocraft_ ... age435.htm
from memory that setup on his red ute there was ~$9000
Re: what length coilovers
what do you want to do with it? winch challenge is a broad term! if you are contemplating coilovers and triple bypass then you are obviously serious and have plenty of $$'s. length is a function of what they are attached to mainly. IE (front end) std or drop radius arms will never use any more than 10" of travel, where a superflex DRA front end will use ~12-13", a custom long arm PRO4 front end might use upto 18-20".OL GQ UTE wrote:Just a quick question about coilovers in a GQ UTE.
im slowly building a winch challenge truck, and am thinking about putting coilovers in the rear. Im wondering what length do most guys run?
I've tried the search but didnt come up with much....any info would be great.
(rear end) ~ std lenght arms and mounts and A frame setups 12-14", long arm 3/4/5 link ~16-20".
there are many other factors to consider in design, more info will help.
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Winch challenge would mean, enough travel, and something that handles, not just flexes, as a "broad term" IMHO.
And if it costs more, and works better, what does $ matter ?
Its either right, or a compromise, and you never want to spend the right $ scond time around when its to late, when you build one.
Standard front arms on drop boxes will use 12" of travel, and remain as you need for such a vehicle, without to much droop, the the control arm angle hinders, instead of helps on steep shelf accesnts, and holes in steep decents.
The long arm with 14"s in the rear is also ideal with roll centre, and length/droop, vs handling, sway bar vs no sway bar etc.
But only if it works correctly.
Flex isnt everything, but momentum, and transmitting torque into drive can be your friend when the vehicle goes where pointed, and soaks it up.
And if it costs more, and works better, what does $ matter ?
Its either right, or a compromise, and you never want to spend the right $ scond time around when its to late, when you build one.
Standard front arms on drop boxes will use 12" of travel, and remain as you need for such a vehicle, without to much droop, the the control arm angle hinders, instead of helps on steep shelf accesnts, and holes in steep decents.
The long arm with 14"s in the rear is also ideal with roll centre, and length/droop, vs handling, sway bar vs no sway bar etc.
But only if it works correctly.
Flex isnt everything, but momentum, and transmitting torque into drive can be your friend when the vehicle goes where pointed, and soaks it up.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
If you are going to stick with the standard Patrol link system and are mounting the coil overs inboard of the chassis rail, which is the only way you can do it with out chopping the chassis rail, there is not much point in going longer than 12" it's just a waste.
BTW i only have 14" remote res in stock, i do have 12" emolsion, but it all depends on your budget and application, you are probably not going to get the right info of the web
<a href="http://s150.photobucket.com/albums/s103 ... 10057w.jpg" target="_blank"><img src="http://i150.photobucket.com/albums/s103 ... 10057w.jpg" border="0" alt="Photobucket"></a>
<a href="http://s150.photobucket.com/albums/s103 ... 10040w.jpg" target="_blank"><img src="http://i150.photobucket.com/albums/s103 ... 10040w.jpg" border="0" alt="Photobucket"></a>
Stu[/img]
BTW i only have 14" remote res in stock, i do have 12" emolsion, but it all depends on your budget and application, you are probably not going to get the right info of the web
<a href="http://s150.photobucket.com/albums/s103 ... 10057w.jpg" target="_blank"><img src="http://i150.photobucket.com/albums/s103 ... 10057w.jpg" border="0" alt="Photobucket"></a>
<a href="http://s150.photobucket.com/albums/s103 ... 10040w.jpg" target="_blank"><img src="http://i150.photobucket.com/albums/s103 ... 10040w.jpg" border="0" alt="Photobucket"></a>
Stu[/img]
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
I think you missed something with the way you inserted the pics.Fathillbilly wrote:If you are going to stick with the standard Patrol link system and are mounting the coil overs inboard of the chassis rail, which is the only way you can do it with out chopping the chassis rail, there is not much point in going longer than 12" it's just a waste.
BTW i only have 14" remote res in stock, i do have 12" emolsion, but it all depends on your budget and application, you are probably not going to get the right info of the web
<a href="http://s150.photobucket.com/albums/s103 ... 10057w.jpg" target="_blank"><img src="http://i150.photobucket.com/albums/s103 ... 10057w.jpg" border="0" alt="Photobucket"></a>
<a href="http://s150.photobucket.com/albums/s103 ... 10040w.jpg" target="_blank"><img src="http://i150.photobucket.com/albums/s103 ... 10040w.jpg" border="0" alt="Photobucket"></a>
Stu[/img]
THOUGHT FOR THE DAY....
Not at all, with correct panhard rod, the rear standard arms will use all 14" of a 14" stroke shock, no problem at all.Fathillbilly wrote:If you are going to stick with the standard Patrol link system and are mounting the coil overs inboard of the chassis rail, which is the only way you can do it with out chopping the chassis rail, there is not much point in going longer than 12" it's just a waste.
Stu[/img]
12" in the front with standard arms, but the right bushes and panhard rod is about 1" more than you need, in the standard shock location, but thats better than not enough
There is no doubt though, if making all new mounts, and moving the arms, then mounting the shocks forward on the arm, and still using 14" works well also, making for height and rate adjustment, and moving the shocks up out of the way compared to the standard location is the ideal way to install them.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
i think Assassin summed it up for what i wantwhat do you want to do with it? winch challenge is a broad term!
will be competing in Vic winch, Engel ser, Ateco style challenges.Winch challenge would mean, enough travel, and something that handles, not just flexes, as a "broad term" IMHO.
No i dont have bucket loads of money but want to spend what i have in setting the truck up right, rather than changing everything around because im not happy.
am planning on running a long arm kit in the rear, although not 100% set on this, and am now leaning towards 14" Coilovers.
Front will still have standard coils at this stage.
What is your budget?OL GQ UTE wrote:i think Assassin summed it up for what i wantwhat do you want to do with it? winch challenge is a broad term!
will be competing in Vic winch, Engel ser, Ateco style challenges.Winch challenge would mean, enough travel, and something that handles, not just flexes, as a "broad term" IMHO.
No i dont have bucket loads of money but want to spend what i have in setting the truck up right, rather than changing everything around because im not happy.
am planning on running a long arm kit in the rear, although not 100% set on this, and am now leaning towards 14" Coilovers.
Front will still have standard coils at this stage.
The $9k was at the time for the whole setup. But times have changed, ask Darren for a quote, he maybe ugly, but he doesn't bite...OL GQ UTE wrote:not 100% sure, but definately not $9000 for a rear setup
Do you wanna spend $1000 for front/rear or $5000 or... ??
Ball park figure will help people tell you what you best options are.
Mick here ya go, not a GQ, but for 16 grand, i would prefer itmickyd555 wrote:where do you buy a truck ready for winch challenge for $20K???B.D.R wrote:Buy a truck already donebog warrior wrote:If you had 20k + to spend ,what would you do????
http://www.outerlimits4x4.com/ftopic175483.php
Old chalenge truck's come up, for around the 20's semi regular, so it's not impossible
We have had coils made which are a 3" HD lift, but stay captive with the 14" rear stroke shocks, and 12" stroke fronts, for this purpose, so with the spring rate, and tunable bypass shocks, you can self tune to suit the application, before looking at any revalving.OL GQ UTE wrote:i think Assassin summed it up for what i wantwhat do you want to do with it? winch challenge is a broad term!
will be competing in Vic winch, Engel ser, Ateco style challenges.Winch challenge would mean, enough travel, and something that handles, not just flexes, as a "broad term" IMHO.
No i dont have bucket loads of money but want to spend what i have in setting the truck up right, rather than changing everything around because im not happy.
am planning on running a long arm kit in the rear, although not 100% set on this, and am now leaning towards 14" Coilovers.
Front will still have standard coils at this stage.
One is early straight tapered wind, which this design doesnt work, spring sags over time, so we went for a tapered wire wind, so they work.
Below is our 100mm longer free height coil on the left, a sagged straight wind, and a coil same ride height, but standard free height, which wont stay captive.
Just as an idea.
So they stay trapped at full droop
We also use these coils with our 10stroke front and 12" stroke Fox Bolt on kits.
no bosy lift on 35" ride height
And ride height on Q78's with 40mm body lift.
GU unloaded on 37's.
Loaded on 35's
And they have to handle, when driving hard, and a little neg camber with bigger tyres sure helps with a patrol!
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Who is online
Users browsing this forum: No registered users and 73 guests