Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

arb compressor

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

arb compressor

Post by thehanko »

Hi Guys,

On the arb compressor out of the same part of the loom as the bigger guage battery cables there is a small guage black/brown cable, whats it for? cant find it on any diagram and my system is not currently working... :bad-words:

need it sorted asap!!

Thanks
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

have you rung ARB and asked them?
Ransom note = demand + collage
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

you can get arb wiring diagrams on their web site
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

ajsr wrote:you can get arb wiring diagrams on their web site
arb dont do late night shopping.

i have trolled through the wiring diagrams following every single wire and can not find this wire, or any wire thats black brown...
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

it was just the earth for the relay, all sorted. compressor now working...

I bought a brand new solnoid from arb the other day and air is pouring out of it, like its exhausting the whole time.

is this just a stuffed solenoid or does something need doing to it?

sorry i have never worked with these before.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

thehanko wrote:
ajsr wrote:you can get arb wiring diagrams on their web site
arb dont do late night shopping.

i have trolled through the wiring diagrams following every single wire and can not find this wire, or any wire thats black brown...
but they were open at 5pm
Ransom note = demand + collage
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

I bought a brand new solnoid from arb the other day and air is pouring out of it, like its exhausting the whole time.
you might have the solenoid hooked up back to front, swap it around with the fitting in the compressor....have had this before
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

grimbo wrote:
thehanko wrote:
ajsr wrote:you can get arb wiring diagrams on their web site
arb dont do late night shopping.

i have trolled through the wiring diagrams following every single wire and can not find this wire, or any wire thats black brown...
but they were open at 5pm
huh? whats the big deal with asking advice? and arb close at 5 here.

thanks for the suggestion ol gq ute, ill have a look at that tomorrow morning, then if its no good ill head into arb tomorrow before work, if i can find time that is... im hectic atm
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Just ignore Grimbo, I think he threw the wrong vowel in when choosing his name.
60 + Turbo, 33"s :armsup:
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

oops wrong thread :oops:
Ransom note = demand + collage
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

thehanko wrote:it was just the earth for the relay, all sorted. compressor now working...

I bought a brand new solnoid from arb the other day and air is pouring out of it, like its exhausting the whole time.

is this just a stuffed solenoid or does something need doing to it?

sorry i have never worked with these before.
if the switches are working fine pull the fittings off the solenoid and make sure the air passages are clean. sometimes when putting them together a little bit of crap can fall in causing it to not hold air properly.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

OL GQ UTE wrote:
I bought a brand new solnoid from arb the other day and air is pouring out of it, like its exhausting the whole time.
you might have the solenoid hooked up back to front, swap it around with the fitting in the compressor....have had this before
cheers dude you were correct, funny how when when you do things wrong they dont work :oops: :lol:

so the compressor and solenoids etc works great.

But I am now the proud owner of an airleaker, hmm why is that rear wheel spinning, oh and why is air pouring out of my breather and the compressor still running...

damn it im supposed to be taking it out tomorrow on the hilux run! hope against hope it can be fixed tonight, not going to be much fun though, im a little sick of pulling axles etc.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

da da da da da da(musical tones)! dumbdunce to the rescue :armsup:

Thanks heaps to brian for getting my lockers all sorted on major late notice.

ah the musical tones of solenoids venting (when they are meant to) :armsup:
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

hopefully thatll learn me to be more careful putting them together.

did the gearbox flange nut nip up make any difference?
Free air locker to the first 20 callers!
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests