at the moment ive got a lokka in the rear and a powertrax lock right in the front of my bj42. in two weeks we'll be doing a spring over on 60s diffs. can i just put the two 40s centres with lockers in the new 60s diffs?
cheers fo the help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40S CENTRES IN 60S DIFFS
Moderators: toaddog, Elmo, DUDELUX
youll be right. the worst part of using 60 diffs for a 40 is that you have to completely cut off the spring mounts because the 40 mounts are narrower than the 60.AUSDOG wrote:sweet as, thanx for the reply. yeah i got a round flange and square on the shaft. if thats my biggest hassle i'm laugh'n. i'm sure it wont be though....
the rest is gravy.
Free air locker to the first 20 callers!
any advice on setting up the 60s power steer box? my 40 is already factory power steer. just need to see a few pics or something of how people have set theres up. prob guna get snake or superior eng x ova steer. any help now is greatly appreciated as we're rippn in to it in the next couple of weeks. i've been looking on ih8mud and a little bit on here, but the more info the beta.
What about the front diff? Looking into putting 60 diffs under a 70 series and the front centre is going to be tight with the spring perchesdumbdunce wrote:youll be right. the worst part of using 60 diffs for a 40 is that you have to completely cut off the spring mounts because the 40 mounts are narrower than the 60.AUSDOG wrote:sweet as, thanx for the reply. yeah i got a round flange and square on the shaft. if thats my biggest hassle i'm laugh'n. i'm sure it wont be though....
the rest is gravy.
I don't remember off the top of my head but I think the 7x chassis is narrower than a 60, and the 60 front diff is going to make your life slightly DIFFicult (ha ha) so you might need to notch it a bit to get the perch where you want it. either that or just let it hang out one side more than the otherhulsty wrote:What about the front diff? Looking into putting 60 diffs under a 70 series and the front centre is going to be tight with the spring perchesdumbdunce wrote:youll be right. the worst part of using 60 diffs for a 40 is that you have to completely cut off the spring mounts because the 40 mounts are narrower than the 60.AUSDOG wrote:sweet as, thanx for the reply. yeah i got a round flange and square on the shaft. if thats my biggest hassle i'm laugh'n. i'm sure it wont be though....
the rest is gravy.
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 0 guests