Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wanted, pics/info on driving lights mounted IN bullbars

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Wanted, pics/info on driving lights mounted IN bullbars

Post by jet-6 »

Guys looking for some info and pics on mounting driving lights "IN" your bullbar

Looking to mount a set of LF170's and a set of LF140's in the side wings of my bar, but need some help

Matt
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Cut the right sized hold for them and weld on some tabs to mount them to, just make sure you have room for the lights behind the bar before cuttting.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

going to be a pretty massive bullbar to fit a LF170 IN it!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

That's what I was thinking too. Not much meat left in the bar if you can actually get a 170 in there.

If you want to get really flash cut the hole slightly bigger, get a bit of flat bar, say 12mm, roll it into a ring and weld that into the hole and sand the faces smooth.
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

The hole in my Sahara bar is almost 150 at the large end as it is, there is heaps of room, i just wanted to see some pics of it done before i make my brackets and front cover
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests