Apparently 15x10s wont fit my60s diffs

Post by **AUSDOG** » Mon Jun 15, 2009 8:22 pm

In the next two weeks we'll be springing over my bj42 on 60 series diffs. i'm looking into wheels and tyres and was pretty much set on the 15x10 series 97 black steel wheels from procomp. i called em today and was spewing when he said they wont fit the 60s diffs cause they hit the front brake caliper.has anyone had this issue. or got any other options in a 15x10 steel wheel that'll fit. I dont really wont to run spaces. can i hit the caliper with a grinder to stop it hitting? any help is much appreciated.

Post by **hulsty** » Mon Jun 15, 2009 8:42 pm

I tried Procomp rock crawler rims, they JUST touched the calipers as the holes are punched into the rim leaving a small lip.

Post by **AUSDOG** » Mon Jun 15, 2009 9:01 pm

so i should just rum em then aye. maybe touch the caliper up a bit. were the ones you tried 15x10s? what are ya useing now? thanks for the reply.

Post by **Weiner** » Mon Jun 15, 2009 9:07 pm

Just get some with a bit more offset, or run small wheel spaces

Post by **dogbreath_48** » Mon Jun 15, 2009 9:08 pm

I ran 16x8 rockcrawlers and had the same problem as hulsty. Ground about 2mm off the corner of the caliper and good to go

Post by **Matt_85Lux** » Mon Jun 15, 2009 9:10 pm

ROH or Mangels should make one that fits. MAte had 15x10 ROH's on his and the GF's dad had 15X10 Mangels (I think there or they were ROH) on his old one

Post by **AUSDOG** » Mon Jun 15, 2009 9:25 pm

Thanks boys. procomps site shows em available with a max offset of -76 with a 2.5'' back space.

Post by **hulsty** » Mon Jun 15, 2009 9:53 pm

Weiner wrote:Just get some with a bit more offset, or run small wheel spaces

The offset didnt affect the rim centre, the ones I tried were the extreme offset model. I went a different direction to widen my car on 15x8's

Post by **Weiner** » Tue Jun 16, 2009 1:16 pm

hulsty wrote:
Weiner wrote:Just get some with a bit more offset, or run small wheel spaces
The offset didnt affect the rim centre, the ones I tried were the extreme offset model. I went a different direction to widen my car on 15x8's

I realised where I went wrong after hitting submit

Post by **AUSDOG** » Tue Jun 16, 2009 6:38 pm

spoke to my engineer this arvy. he says wheel spaces are the go.

Post by **crispy zook** » Tue Jun 16, 2009 7:40 pm

my 15x10s -44 offset fit with a 5mm spacer

Post by **AUSDOG** » Tue Jun 16, 2009 7:56 pm

crispy zook wrote:my 15x10s -44 offset fit with a 5mm spacer

fit your zook,hilux or a 60series? where did you get your spacer from?

Post by **strom80** » Wed Jun 17, 2009 5:05 pm

I run 15x10 with -44 offset sunnies and they don't hit the caliper

Outer Limits 4x4 Board

Apparently 15x10s wont fit my60s diffs

Apparently 15x10s wont fit my60s diffs

Who is online