Any estimates on how long this takes?KiwiBacon wrote:My inline pump has a control cable which locks it into full fuel for startup. This remains until the governor senses enough speed to unlock it and return to governor control.tweak'e wrote:its been a long time since i looked at it but not from what i can remember.Chucky wrote: .....
And from what I have seen every governed diesel engine when shut down (Fuel rack will go to the no fuel position) will reset to full fuel in rest position, so when it starts up it is at full fuel, even if for just a very short time.
shut off at idle, control arms almost at minimum, governor will retract when its stopped so it will move the control arm a little bit toward more fuel.
but to go full fuel it would have to fight against the control spring. control spring tries to keep it at idle because thats where the throttle is.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
More fuel efficient-idling vs switching off when stopped?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
So on a di engine like a 4BD1 you would be at max fuel for 1-2 revolutions of the engine and maybe another 10 revolutions until cranking speed had been reached???KiwiBacon wrote:I think somewhere between idle and cranking speed it releases.ISUZUROVER wrote:
Any estimates on how long this takes?
Any specs on the fuel delivery at max fuel vs idle?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Bush65 has all the specs on delivery volumes. I remember seeing 220 cc/thousand shots but can't recall if this was a 4B or 4H series Isuzu.ISUZUROVER wrote:So on a di engine like a 4BD1 you would be at max fuel for 1-2 revolutions of the engine and maybe another 10 revolutions until cranking speed had been reached???KiwiBacon wrote:I think somewhere between idle and cranking speed it releases.ISUZUROVER wrote:
Any estimates on how long this takes?
Any specs on the fuel delivery at max fuel vs idle?
What f@#$%&ing c#%% ar$#@@%le stereotyped us people from Gympie anyway, and what stereotype is thatISUZUROVER wrote:
Doing a good job to change the stereotype about people from Gympie...


Come on give us a break, we've only got 2 traffic lights in town so I'm not used to sitting a the lights for more than 20 seconds per day. This new environmental practice will surely blow that time out to easy 30 seconds, let alone when I go to the Big Town once a year for the gun lovers association AGM

Who is online
Users browsing this forum: No registered users and 1 guest