Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What are hilux diffs made out of?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply

cast or steel

cast
4
12%
steel
30
88%
 
Total votes: 34

Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

What are hilux diffs made out of?

Post by 31zook »

Ok so im building a track bar for a mates zook/lux, Im sure that they are steel but my old man thinks they are cast. I know how to weld cast so don't worry bout that, but i would like to convice the ol man:D

Everyone just tell em what you think we'll do this on a vote
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

metal... :finger:


nah they aint cast. but even if they where, they would still be steel :P
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 17
Joined: Fri May 30, 2008 1:58 am
Location: Perth, WA

Post by HuxLux »

Lol yeh which part are you talking about! Just weld it like you would if it was cast, either way you cant stuff it up. Oh and there was a simple noise test to see what it was, i cant remember it though, do a google search.
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

HuxLux wrote: Oh and there was a simple noise test to see what it was, i cant remember it though, do a google search.
if you hit it, and it sounds like a cat, then you are probably trying to weld a cat.

i find rods with a feline filler are best for this kinda work
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Sugar and Spice and everything nice
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Posts: 17
Joined: Fri May 30, 2008 1:58 am
Location: Perth, WA

Post by HuxLux »

macca81 wrote:
HuxLux wrote: Oh and there was a simple noise test to see what it was, i cant remember it though, do a google search.
if you hit it, and it sounds like a cat, then you are probably trying to weld a cat.

i find rods with a feline filler are best for this kinda work
Now now! Nah honestly one knocks and one rings or maybe thats cast steel and cast iron. bah dont listen to me :roll:
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

The housing is pressed metal welded together. You can very clearly see the welds along the back of the housing where the housing grows toward the centre.

The 3rd member, or diff centre, is cast steel.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 7
Joined: Fri Feb 06, 2009 2:39 pm
Location: BERWICK

Post by TRISHR »

The axle housing is steel ( pressed sections and welded together ) the 3rd member ( diff centre ) is cast iron.

Wally
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

TRISHR wrote:The axle housing is steel ( pressed sections and welded together ) the 3rd member ( diff centre ) is cast iron.

Wally
X2
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Track rod usually goes to the axle housing doesnt it.

Anyway, I voted steel and then the forum said that my vote was cast..... so please take one off cast and add it to steel. :lol:
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

Post by mellows40 »

Hey, I know the answer to this one...... Ummm metal.... ha ha ha :D :D :D
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Top
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

Toyota diff? Cheese judging on how weak they are!
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

kane077 wrote:Toyota diff? Cheese judging on how weak they are!
Lolol prob like the swiss you have for a brain :roll:
Top
Posts: 341
Joined: Wed Jun 13, 2007 9:45 pm
Location: Ipswich, Qld

Post by Micky-Lux »

kane077 wrote:Toyota diff? Cheese judging on how weak they are!
I thought they were made of ear wax.
2000 SR-5 turbo diesel, dual airlockers, bit of a lift, some 15x8 sunnies, 32" bighorns, a few spotties, and a wireless, and a kiddie seat in the back.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests