Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Adjustable panhard rod

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Adjustable panhard rod

Post by hudson44 »

I need an adjustable panhard rod for the rear of my NJ Paj as it has about 4" of lift now (new Patrol springs) and the diff is noticeably sitting so one side causing some ordinary uni angles and a slight vibration.

Has anyone sourced an aftermarket adjustable panhard rod for one of these or know of any other vehicles that have a similar length Panhard which i could chase an adjustable one from? VL commodore comes to mind.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Mine was an aftermarket Patrol unit, supplied & fitted by 4wd Systems. If it wasn't a direct bolt-in job, it wasn't a difficult fitment.
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

I also used a custom one that was made for a GQ.
The bushes were the right size. Just adjust it to the correct length.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Thanks boys. Measured up a GQ one today and there is only 10mm difference in length. Will order an adjustable one tomorrow.
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

I scored a standard size GQ one from work. I had to re bush it as the patrol bushes are 14mm and 24mm where as the Paj eyes are 16mm. I just used some nylon patrol bushes from the smaller end and made up crush tubes to fit. With that extra 10 to 15mm of length it has bought the diff back to almost perfect centre which has also fixed the vibration i had as the drive shaft is re-aligned.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 19 guests