99 Jimny mods..... wat can i do?

Post by **jimny_99** » Sun Jun 21, 2009 11:44 pm

Hi all,
have a 99 jimny and all i currenty have on it is 225/75 tyres and 50mm spring spacers. im looking at getting the springs and shocks upgraded soon, what brands are good? ive seen a 2inch tough dog set for 950 on 4wd1.com but dont really want to spend that much. also front bars... is ARB the only place that make them. and finally engine upgrades.... can bigger vitara engines get put in????
any input on any other mods would be appreciated too[/img]

Post by **Remydog05** » Mon Jun 22, 2009 9:21 am

Do a search mate and see what you can find?

Punch in a lot of different options like "Jimny Conversion" Jimny to 1.6 etc etc

If you have the 13bb Im pretty sure you could use an 1.6 apdaptor to put in a VIT/Bal 1.6??

Do some searching and place you findings up and someone will help.

How do you find the 13bb runs? Good Motor?

Post by **kyzermattingley** » Mon Jun 22, 2009 12:59 pm

Some pics I took in Japan

enjoy

Post by **jimny_99** » Mon Jun 22, 2009 1:24 pm

Yeah the 1.3L is a little beauty! goes all day, 4wd low range she runs out a little tho. but you now how it is you always just want a little bit more

Post by **mud4b** » Tue Jun 23, 2009 8:15 am

They are pretty much the same as a sierra when it comes to fitting engines (anything goes), with the 1.6 vitara using the std spacing (even with adaptor) you need to watch the middle of the firewall, we had to cut a bit out to fit the dist.

cheers mark.

Post by **Remydog05** » Tue Jun 23, 2009 8:29 am

There you go put a Vit 1.6 in there and sell me the G13bb!!!

Post by **jimny_99** » Tue Jun 23, 2009 11:10 am

Ive been looking around, and have found some other forum sites that have mentioned rebuilding the engines and boring them out to about 1500cc. my motor is only at 110,000kms so its still running perfect, might look into this option aswell see what i can find.

Post by **spamwell** » Tue Jun 23, 2009 5:19 pm

jimny_99 wrote:Ive been looking around, and have found some other forum sites that have mentioned rebuilding the engines and boring them out to about 1500cc. my motor is only at 110,000kms so its still running perfect, might look into this option aswell see what i can find.

whats forums are these i can never find anything on g13bb's

Post by **Remydog05** » Tue Jun 23, 2009 9:13 pm

Really! Ive never heard that one

I would talk to joeblow or a few others that see Zuk motors daily before I did that. A bore can be done very well or VERY bad!

Good luck!

Post by **jimny_99** » Tue Jun 23, 2009 9:49 pm

cant remember the exact site, but i know the feeling there is sfa on the 13bb, spent a good couple of hrs searching google

Post by **mud4b** » Wed Jun 24, 2009 9:24 am

just supercharge it, you will need a surf map sensor though.. easy as..

cheers mark.

Post by **Ridge** » Wed Jun 24, 2009 10:37 am

950 for a lift kit is a good price.
try tjm for a bar, or you could always make one.

does anyone know if there are any bigger suspension lifts for the jimny then 80mm? im playing around with some ideas for a project....

Post by **bowesy89** » Sun Jun 28, 2009 12:32 pm

[quote="Ridge"]950 for a lift kit is a good price.
try tjm for a bar, or you could always make one.

does anyone know if there are any bigger suspension lifts for the jimny then 80mm? im playing around with some ideas for a project....[/quote]

hey mate i gave big balls a call regarding it they dont advertiuse it but they used to do a 4 inch for a jimny.. give them a go.. i'd also like to know if anyone done a bigger lift for them??

Outer Limits 4x4 Board

99 Jimny mods..... wat can i do?

99 Jimny mods..... wat can i do?

Who is online