Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front spring qtn

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

front spring qtn

Post by get it up there »

hey peoples! Im running front springs out of a 1980 RN46 flat try lux in the rear of my zook.. and im finding i pretty much dont like them! They have stopped axle wrap etc.. but they are very stiff, and they dont like to flex!! Any idea what other springs are a bolt in fit.. which will offer a better ride/articulation? Thanks heaps!
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Posts: 2
Joined: Sun Dec 21, 2008 6:57 pm
Location: bundaberg

front springs

Post by redpig »

they are out of a gen1 lux i no that the ones out of a gen 2 are the go but you do have to remove leaves as the ass of a zook is alot lighter than the front of a lux
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Re: front springs

Post by get it up there »

redpig wrote:they are out of a gen1 lux i no that the ones out of a gen 2 are the go but you do have to remove leaves as the ass of a zook is alot lighter than the front of a lux
sweet,, thanks mate. Gen 2.. how do i determine the difference between a gen 1 and gen 2? **please**
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests