93 rocky trailing arms

Post by **Big_Z** » Tue Jun 09, 2009 11:11 am

does anyone know of a wrecker with them in Adelaide or if I'm able to get after market ones as i snapped one on the wkend

Post by **HotFourOk** » Tue Jun 09, 2009 7:35 pm

You can still get them genuine from Toyota, but I would cringe at the asking price.

Damn you must have been driving it hard!

Post by **Big_Z** » Tue Jun 09, 2009 8:49 pm

i rang all the wreckers in adelaide and no one has anything and i called cmi as well they had nothin the dude said. talked to trek tech and they might be able to cut it up and repair it ill up load a picture.

yeah she got a work out on the wkend surprised at how well she went.

Post by **Big_Z** » Tue Jun 09, 2009 9:04 pm

Post by **dai-hard** » Tue Jun 09, 2009 9:14 pm

I know there not in SA but they will post anywhere and are good guys i thought i seen a maroon 93 last time i was there.
http://www.coast4x4wreckers.com.au/Default.asp

Post by **kyzermattingley** » Wed Jun 10, 2009 9:13 am

I had no idea that there even was a coil sprung rocky, can you show a pic from further back under the car to see what the rest of the set up looks like, is the front coil, leaf or torsion?

Post by **kyzermattingley** » Wed Jun 10, 2009 9:31 am

I had no idea that there even was a coil sprung rocky, can you show a pic from further back under the car to see what the rest of the set up looks like, is the front coil, leaf or torsion?

Post by **Big_Z** » Wed Jun 10, 2009 11:07 am

yeah they made a coil spung rocky i think 93 onwards they were coil in the rear and ifs in the front. here are a few rear diff pic i can get pics of the whole car if u would like

the only down side to the car is the ifs. I'm looking into converting the front ifs to axle so i can lift it more and get a better ride out of it just need to get a list of what's needed so if anyone can help with coil/axle conversions id appreciate it

Post by **dai-hard** » Wed Jun 10, 2009 4:31 pm

The easiest way would be to get a front diff out of an early model diesel and weld on all the spring perches and arm mounts.

It would be a big job but all the steering/brakes/ratios would be the same
not sure about the width.

Post by **Big_Z** » Wed Jun 10, 2009 6:18 pm

what model would should i get it out of and other than the diff what else will i need I've spoken to a few people an they have said it isn't that big/hard of a job worth it imo

Post by **Big_Z** » Sun Jun 14, 2009 12:34 pm

does anyone have a set of rear trailing arms i have spent the last wk calling places and searching the net and I've come up with nothing some1 must have some spare lying round the shed

Post by **Spartacus** » Sun Jun 14, 2009 8:40 pm

Could you make your own rear arms?

Using RHS 5mm+ thickness, weld in the bushes and some plate for coil mounts.

For the front:

F75, F77 daihatsu front diff.

Make a whole new front crossmember for the front suspension mount -similar to hilux item.

Cut a hole in the chassis for the swinging shackle, sleeve the hole.

My idea for suspension is to use F77 REAR ute leaves in the front.
The have the same front to center, but are 70mm longer.

Post by **Big_Z** » Tue Jun 16, 2009 8:54 pm

spartaus have you done a coil conversion if you have could you help us out with a parts list? i have never done something like this and need the help

also today started taking out the trailing arm on the passenger side will finish taking it off then i have to find a place that will/can repair and beef up my broken one

Post by **Spartacus** » Tue Jun 16, 2009 10:40 pm

Big_Z wrote:spartaus have you done a coil conversion if you have could you help us out with a parts list? i have never done something like this and need the help

also today started taking out the trailing arm on the passenger side will finish taking it off then i have to find a place that will/can repair and beef up my broken one

hey fella,

i coiled the rear of mine using pajero arms and coils.

dropped front crossmember for leaf spring fornt diff

Post by **Big_Z** » Tue Jun 23, 2009 7:42 pm

hey guys I've found a place that can repair my trailing arms they just cant find any info about the angels would someone with a 93 rocky be willing to measure the angel? and also get the measurements for the different bushes. as mine have been mashed thanx

Post by **Big_Z** » Thu Jun 25, 2009 4:54 pm

come on guys help a brudda out

got a 4x4 trip in 3weeks time and im wanting to go

Post by **Big_Z** » Sat Jun 27, 2009 9:53 am

no one???

Post by **Clint** » Sat Jun 27, 2009 9:56 am

Mate, it i had one or new someone with one i would help ya out.
But i don't sorry.

Good luck.

Post by **Big_Z** » Sun Jun 28, 2009 12:44 pm

thats chill man im sure someone will help out soon

Post by **Spartacus** » Tue Jun 30, 2009 7:40 pm

Big_Z wrote:come on guys help a brudda out got a 4x4 trip in 3weeks time and im wanting to go

could you use the other side to measure off?

could try the manual from warfs

Outer Limits 4x4 Board

93 rocky trailing arms

93 rocky trailing arms

Who is online