Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

SWB Vibration

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 38
Joined: Sun Feb 01, 2009 3:36 pm
Location: Brisbane, QLD

SWB Vibration

Post by ziggy_170 »

Hey everyone. I've got a SWB with a 3" suspension lift (and 15mm packers in the back) and only 32" bighorns. I had drop boxes put in with the lift, and the car had vibrations so i put shorter rear upper arms from superior on (non adjustables due to being a poor uni student). A couple of months down the track and i've just put 16mm longer rear lower arms on because the car would slightly vibrate when the fuel tank was low and was told longer lowers would fix it. Now the car is vibrating like a crazy and is much worse!! could the diff have been pushed too far back or pinion angle rotated too much?
Posts: 33
Joined: Sun May 13, 2007 11:24 am
Location: Melbourne

Post by TR3LOS351 »

im no expert but i reckon because you put shorter top arms which turn the top of the diff a lil to the front and when you put longer lower arms you have now pulled back from the bottom of the diff.
So maybe you have over corrected the angle to stop the vibration.

Just a thought!
Posts: 38
Joined: Sun Feb 01, 2009 3:36 pm
Location: Brisbane, QLD

Post by ziggy_170 »

yeah thats what i thought. might have to buy some adjustable uppers and sell the fixed ones.
Post Reply

Who is online

Users browsing this forum: No registered users and 111 guests