Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Which one is Four link and Rear disk?

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Which one is Four link and Rear disk?

Post by Remydog05 »

Gidday

Can anyone help me figure out what the diff is in the pics in this thread?
http://www.outerlimits4x4.com/ftopic176826.php

I was told it was Isuzu but I have no idea.

I have done some reading and searches and I see the SWB Frontera and some Jackaroos had a Rear 4link and disk brakes, maybe thats it?

Any ideas?
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

Post by Yarno »

If it is disc it will be early jackaroo (88-91) or MU, and if it is drum it would be rodeo... either way all the mounts are custom as they are leaf from factory.
Go hard or go home!!!
MU build here
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Ah Ok

So its early Jackaroo 88-91 or All Mu's

So the Jackaroo that were 4 link were not disk rear?

Are they a very strong diff/axel/etc?

Any ideas of ratios?

Rob
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

Post by Yarno »

Ok from 92 on all the Jackaroo's have a 3 link with panhard (4 link) and disc rear, these are Isuzu diffs.

The Frontera have 5 link rear and disc, and it is a Dana 44 (some are different types of Dana and need different lockers).

I'd say the Isuzu diff is stronger from what most say, it has an 8.75" crown wheel.

Ratios are usually 4.3, 4.56, and maybe 4.77.
Go hard or go home!!!
MU build here
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Thanks Yarno thats a big help

Any others or just Jackaroos?
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Bump

Anyone know which models have the 4.56 diffs?

The width of the Izusu diff WMS to WMS?
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

Remydog05 wrote:Bump

Anyone know which models have the 4.56 diffs?

The width of the Izusu diff WMS to WMS?

4.100(6VE1) - Auto 3.5L Petrol
4.300(4JX1, 6VE1) - 3.0L Diesel, Manual 3.5L Petrol
4.555(4JG2–TC, 6VD1) 3.1L Diesel, 3.2L Petrol
4.777(4JG2) - non turbo

92-97 both 3.2L petrol and 3.1L turbo diesel


the front diffs are all isuzu 10 bolt, and it's the same diff used in the 1st gen rear ends
the 4.1 to 4.3, and the 4.555 to 4.777 are interchangable with just the gears

to go from the 4.1 or 4.3 to the 4.555 or 4.777 you need to replace pretty much all the guts of the diff
http://forum.australia4wd.com/index.php ... ntry114226

contact batman and hopefully he will do a writeup
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

thanks mate great info and will do

any ideas of the width of them??
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 2 guests