Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Info

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Info

Post by OVERKILL ENG »

Okay all you Toyota guru's
I am after any informoation as to weather the auto that comes with the lexus v8 will mate up to hilux transfer. :?:
If not is there an adapter available :?: :?:
Or is there an auto that can be mated to both :?: :?:
Any info would be greatly appreciated.
Thanks
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Sam i beleive you can bolt the chain drive Tcase behind the Lexus Auto But you can get this adapter from OTT industries in the U.S to make the toy case divorced so you can run the gear driven case.Then you just run a stock auto.
Top
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Contact:
Contact suprasurf

Post by suprasurf »

The A340 auto in the Lexus is also in the later Surfs so the transfer case is the same.. which is the chain type.

I assume what you really want to know is can you put the gear driven transfer case on the A340. Marlin makes one:

Quote from Marlin site "Tacoma/4Runner (95.5+) 5 Spd Trans/Automatic to Gear Driven Reduction Housing (79-95) Adapter W59/R150F/A340 to R1FA" :D :D
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Thanks guys
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

What's the advantage of the gear driven case over a chain driven one?
KRiS
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

OK ... just worked it out. Chain drive mechanism is weaker?

Next stupid question ... What are the gear driven cases in? (ie 89+ Lux, Diesel or petrol, etc)
KRiS
Top
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Contact:
Contact suprasurf

Post by suprasurf »

Gear driven is on the back of the early 4 speed boxes and the G52/W56 box which is in the hilux range until mid 1990's.
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

No worries, thanks.
KRiS
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

If its IFS then its chain driven. All Hilux`s became IFS in November 1997.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

my hilux is december 1997 i think (of memory) maybe newer :finger:

i think its IFS?!?!?! :oops:
hands and mums dont count!!!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Guts wrote:If its IFS then its chain driven. All Hilux`s became IFS in November 1997.


Not all IFS are chain driven.
Early 4runner imports with IFS run a W56 box and a gear driven case.
And Early Aussie 4runner IFS vehicles run a G52 with gear driven case as well.
All V6 4runners run a chain driven case.
I beleive up till the change over in '97 the IFS hilux's ran a chain driven case as well.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

RUFF wrote:Early 4runner imports with IFS run a W56 box and a gear driven case.
.





dont some even run a gear driven and have solid axles?



NICK
TECH SCREW GURU
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Re: Info

Post by NICK »

overkill wrote:If not is there an adapter available :?: :?:




i put some thought into this a month or so ago and this is the best combo i could come up with....


Castle main sell a kit to join the lexus to a supra 5 speed, so you buy that adaptor and then marks sell a kit to fit the toyota case to the supra box, so that bolts all the together, and inbetween you toss in a dualcase adaptor.

Yeah should work and thats the best i could come up with for this swap.


NICK
TECH SCREW GURU
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Re: Info

Post by OVERKILL ENG »

NICK wrote:
overkill wrote:If not is there an adapter available :?: :?:




i put some thought into this a month or so ago and this is the best combo i could come up with....


Castle main sell a kit to join the lexus to a supra 5 speed, so you buy that adaptor and then marks sell a kit to fit the toyota case to the supra box, so that bolts all the together, and inbetween you toss in a dualcase adaptor.

Yeah should work and thats the best i could come up with for this swap.


NICK


Nick I appreciate the thought you put into my question but we actually want to run the auto so my next question would be will the Supra auto do the same.
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

The adapter (from Marlin) to put the A340 Auto box to a gear driven case looks pretty simple. Maybe Mark's has something in the pipeline or be willing to fab something up if pushed hard enough. This way you could keep the Lexus V8/Auto combo with it's original computer, loom, etc for reliability and serviceability.

1 adapter plate and a couple of engine mounts makes for a pretty simple conversion ...

Just a thought ...
KRiS
Top
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Contact:
Contact suprasurf

Post by suprasurf »

Remember the A340 auto is computer controlled so its best to try and get a front cut so you get donk, box, loom and computer.

Also the A340 bolts straight up to a heap of different toyota donks so you can save heaps of dough no havin to buy an adapter !!
5M series 2.8 .. like mine (160hp)
7M series 3.0 turbo/non turbo (180-250hp)
1JZ 2.5 twin turbo/single turbo/non turbo (180-280hp)
2JZ 3.0 twin turbo/single turbo/non turbo (200-350hp)
plus the diesels 2L, 2LT, 3L, 5L and 1KZ and......
Lexus of course :D
and prob a heap more ?

so if you can't find a motor in that lot to do the job :shock: :shock:
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

sam,


contact Wayne at Waynes 4x4 World in burleigh heads as he as done the conversion and made the adaptors.
TECH SCREW GURU
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

waynes world of four wheel drive conversions,

nice guy to chat to on the phone!
hands and mums dont count!!!
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

Bj, honestly is there anyone you havent talked to on the phone?



NICK
TECH SCREW GURU
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

NICK wrote:
RUFF wrote:Early 4runner imports with IFS run a W56 box and a gear driven case.
.


dont some even run a gear driven and have solid axles?

NICK


REALLY??? some of the IFS trucks had a solid axle?

INTERESTING :roll: :lol: :oops: :o :finger: :?
hands and mums dont count!!!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

NICK wrote:Bj, honestly is there anyone you havent talked to on the phone?



NICK


:twisted: gotta keep on top of whats going on!!
hands and mums dont count!!!
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i think you just like being on top.


NICK
TECH SCREW GURU
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

OK, now just visualise BJ spanking it saying "wayne's world! wayne's world! party on! excellent!"



it must be late and the bottle of bundy black is getting empty...


:finger: :finger: :finger:
Top
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Contact:
Contact cooter

Post by cooter »

who actually makes this adaptor phone number website?
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest