Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diff breathers

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 28
Joined: Fri Jun 15, 2007 3:22 pm
Location: sunny coast

diff breathers

Post by wags »

diff breathers r the standed in a feroza was going to make some put my head under the 4b they r allready on there only had the car 3 weeks do they come with breathers or has someone made them ..... i need to get me a manual ...
stock 4bs suck need to modify
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

They're standard.
David
Top
Posts: 28
Joined: Fri Jun 15, 2007 3:22 pm
Location: sunny coast

Post by wags »

oh cool thanks
stock 4bs suck need to modify
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

But the rear is a problem in that it only extends up into the rear crossmember which really isnt high enough if your going to do some serious water crossings.

I'd extend both as high as possible if i were you.

Also don't overlook the transmission and transfer... although I can't really remember how they are vented ( been awhile ).
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

MightyMouse wrote: Also don't overlook the transmission and transfer... although I can't really remember how they are vented ( been awhile ).
They're joined together via the same breather tube and it's run up into the engine bay. (Looped behind the windscreen washer bottle IIRC?)
David
Top
Posts: 28
Joined: Fri Jun 15, 2007 3:22 pm
Location: sunny coast

Post by wags »

i see the back one goes in to the crossmember but can see where it goes from there they should be joind then you think.. i will have to pull the rear wheels of and have a look ...
stock 4bs suck need to modify
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 5 guests