Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sill Tanks

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 36
Joined: Mon Sep 08, 2003 9:53 pm
Location: Vic

Sill Tanks

Post by Fubar Paul »

Does anyone know where I can get a pair of sill tanks, for my 82 Rangie??
The liver is evil and it must be punished!!!!!!
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

I've got a pair sitting in my garage taking up some space.... Look to be homemade, and I think I worked out they'd hold a bit over 30 litres a side. Filler would be accessed through a hole in the rear footwell. From memory one side has had the mounting tags cut off in preparation for lifting them up to match the bodylift (so they didn't sit flush to the bottom of the chassis). should be no probs welding new tags on, the tanks have been empty for at least 2 years, and part of the old tag is still on the tank, making a good thick bit to weld too.

Make me an offer?
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 36
Joined: Mon Sep 08, 2003 9:53 pm
Location: Vic

Post by Fubar Paul »

have you got any pics,I'm not sure what they look like or how they are fitted?
The liver is evil and it must be punished!!!!!!
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

I don't at the moment, if you want I'll dig them out tomorrow night, take a couple of photos and email them through to you.

They are the same height as the chassis, are the same width as the distance between the outside of the chassis rail and the sill on the body, and run the length between the two chassis outriggers that the body mounts to (a few inches behind the front wheelarch, and a few inches in front of the rear wheelarch). They bolt to those two chassis outriggers at the ends, and i think they have two bolts that go into the chassis itself somewhere in the middle. Probably a lot clearer with photos, might sit one up under my rangie tomorrow night while I'm taking photos.
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

1 bracket uses 1 of the t/case mount bolts and the other you need to drill a hole and put a crush tube in.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Fubar Paul wrote:have you got any pics,I'm not sure what they look like or how they are fitted?
I just emailed some pics to you.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 139
Joined: Mon Dec 05, 2005 6:06 pm
Location: Eastern Melbourne

Post by awright »

yeah and keep in mind that the tanks for the RR dont fit a Disco necessarily due to the body brace that runs through in the disco.

Long Range Automotive mod Range Rover ones up with notches so they will fit a disco for about $150...

Ask me how I know.... :roll:

Anyhow fair to say my $250 tanks are now worth $550!
Take me to the Bush!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 7 guests