Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33x12.5 maxx rubbage or not

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

33x12.5 maxx rubbage or not

Post by mrRocky »

Iam currently building a rig for a comp in setember but it isnt going to be ready so im chucking some gears and lockers in the 1ltr stockman .
I dont want to break the axles instantly so running 34" simex JT2's is out of the question, the only other tyres ive got are a set of 33x12.5 maxxis on offset f100 rims.
The rear of the car isnt a problem as i can just take of the tray, the front has 2" BL, 2" springs, 3" shackles and i was going to move the diff forward 20mm and possibly fitting 2" wheelspacers. Are they just too wide or will they fit without mega-rub
cheers mick
Top
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

it could be ok with your set up.
any offset on the rims would help
4age zook ute in lots of bits
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

i run 33x12.5 on 15x8 -28 offset. (Biggest offset on shelf new) Unsure of F trucks rims..My lift consists of 2"bl prob 1" spring lift overall, including my 3" shackles because of my longer springs..The front diff is 25-30mm forward. You will need a hammer at least. And if you go the wheel spacers, you may need a bigger hammer, grinder, and/or longer bumpstops..

I still scrub, but lightly. No massive grabbing.
I am Tim
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

oh dont worry ive got a very big hammer.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

:D
I am Tim
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

Ridge wrote:it could be ok with your set up.
any offset on the rims would help
No. 2" spacers would be pushing it. You'll have alot of offset which equals alot of tyre swing lock to lock (scrub radius). The outside edge of your tread will eat the bottom of your flares/firewall.
I'd recommend JUST enough offset to get your tyres off the springs at full lock and then work guard-rubbage around that.
All the gear, No idea...
Top
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

grinder and big 10pound lump hammer will fix the prob and put a smile on your face
[quote="MissForby"]"I like Pillows. I'm not allowed anything hard" :D[/quote]
94 vitara, rear air locker, 31's, dual battery, custom front and rear tube bars, chopped guards, reduction gears
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

the car is doubling as my work car atm so im a bit hesitant to kill the body too much. I may do a RUF to get them of the firewall, fingers crossed they dont hit the springs, i did run 33 simex's with a similar setup but they were only 10.5's
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests