Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Thump, bloody Thump, What is it??????????

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 51
Joined: Wed Jun 03, 2009 8:58 am
Location: East Lake Macqarie

Thump, bloody Thump, What is it??????????

Post by rattlinjack »

Trying to work out what the hell is causing an annoying "THUMP" coming from the rear of the car!!!!!???? :x
Every time I turn a slight corner, bloody THUMP.... Turn left, THUMP, Turn right, THUMP. Sounds like its coming from the diff housing area!
Ive had a good look, can't find any evidence of things moving around! Jacked the wheels off the ground, and tried to move the suspension by hand, exhaust doesn't seem to move, shook the shit out of the car, nothing obvious.......... Can't move the spare wheel........ Any ideas :?:
Ban the Whale..................
Save the bombs...............
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

what sort of car?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Empty stubby/s, thats what my noise is :D
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Control arm bush
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Havn't welded the diff? with my airlocker on the bitumen, you know trying to fit in with the sick welded mc hammer boys, the diff thumps as the centre locks against the axles.

Short of that the diff "could" be on it's way out and the spider geasrs/pinion gears are not spinning as they should.

What sought of car/supension does it have will help, once when i didn't retighten the u bolts after changing leafs they came a little loose and it would clunk around corners. (not safe at all)

Wheel nuts tight?
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Post by Stackson45 »

yeah - all of the above - maybe shock bush missing?
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Swaybar mount bushes?
Top
Posts: 51
Joined: Wed Jun 03, 2009 8:58 am
Location: East Lake Macqarie

Post by rattlinjack »

Thanks people!!!!
I am a DUMBARSE It's a 1985 landcruiser 62 series!

The U bolts seem tight, haven't looked at the shocks, didn't notice if it has a swaybar, not welded diff...........

I'll have another go at in the morning, will let you guys know if I find the culprit....................
Ban the Whale..................
Save the bombs...............
Top
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

Could be worn suspension bushes or axle wrap if you have taken any springs out.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Top
Posts: 751
Joined: Tue Jul 24, 2007 8:55 pm
Location: GlassHouse Mountains

Post by taps »

Loose body mounts ??
YOUR 4X4 ACTION
personalized 4x4 d.v.d's
"Let us capture your action" [url=http://au.youtube.com/watch?v=QefnzCt975c][b]Click Here To View Our Video Trailer[/b][/url]
Top
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

thump bloody thump thump

Post by zoook »

check the bushes at the front of the rear springs my bet is the wrap on the second leaf hitting the spring hangers as it moves left or right there is a clamp that holds the pack in alignment check its tight or in fact even still there........... some blokes remove it because it limits flex on leaf sprund trucks...following that as the rest of the crew said, u bolts, rear bushes, body mounts
rooted diff ...probably in that order as well ....
Top
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

thump bloody thump

Post by zoook »

one more thing the hinges on the rear doors if its a barn style can wear you will get a little play in the hinge with the door open and you wll find as the body flexes around corners they move with the play causing the thump remedy move the top door rubber rest and the bottom rest out a bit to tighten up the door a little and a bit of wetsuit rubber along the bottom and top of the doors you will see the wear mark where its hitting if thats the cause or new hinges what evers easiest for you
Top
Posts: 51
Joined: Wed Jun 03, 2009 8:58 am
Location: East Lake Macqarie

Post by rattlinjack »

RESOLVED

Ended up being the rear drivers side spring hanger!
I was going thru everything that had nuts and bolts, all seemed good!
Then I noticed that this rear spring hanger had two nuts on the bottom bolt, took it apart, and found the bolt was stripped of thread under the first nut, so they had a second one on top, to hold it all together :roll:
So I replaced the first nut with some washers, this covered the bad bit of thread, then bolted it up , took it for a test run, NO THUMP
Will still have to get a new hanger!
How do I tell if this is a standard hanger?
See if this pic works..............
Image
Ban the Whale..................
Save the bombs...............
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Its standard, and its called a shackle. Shouldnt be too exy at Repco and the like. Looks like your spring eye/shackle bushes are near due for replacement too.
Top
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

Piss off the standard shackel pins for greaseable jobs or PM wozza224 and see if he still has the snake extended shackels that come out of his cruiser he is parting out
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

What does he want extended shackles for without changing spring packs.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 3
Joined: Sun Aug 17, 2008 10:44 am
Location: IPSWICH QLD

Post by 85 l200 »

did you have a full tank or even a3/4 tank , might be a stretched tank strap
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

lokka wrote:Piss off the standard shackel pins for greaseable jobs or PM wozza224 and see if he still has the snake extended shackels that come out of his cruiser he is parting out
Cheers Lokka, but a bloke has bought them off me, got $300 for them, $60 profit!! Beauty!!
PM me for any more 60 parts guys the lot has to go
Get out there!!
Top
Posts: 51
Joined: Wed Jun 03, 2009 8:58 am
Location: East Lake Macqarie

Post by rattlinjack »

So What else ya got left Wozza???
Ban the Whale..................
Save the bombs...............
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Your head board could be to close to the wall
mine was didnt work it out till the misses head ended up in the next room
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests