Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

radius arm flip kit?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 78
Joined: Tue Jun 16, 2009 5:36 pm
Location: NSW Queanbeyan

radius arm flip kit?

Post by young pup »

just wondering if there is a kit on the market for flipping radius arms?
is this worth doing? what troubles will this create or solve?

was maybe thinking of flipping the the radius arms and then joining the front of the arms onto a homemade xlink...

keep in mind this is being built up as a winch comp truck, no on road use...
young and doesnt know any better, thats my excuse any way.
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Re: radius arm flip kit?

Post by macneil »

young pup wrote:
was maybe thinking of flipping the the radius arms and then joining the front of the arms onto a homemade xlink...
thats would only increas upwards travel as it would hit the diff instead of dropping away.. unless you had it on the rear bushes..you could get alot of flex then..
Posts: 197
Joined: Wed Nov 02, 2005 12:40 pm
Location: Moss Vale NSW

Post by MONGREL »

I think main problem would be very little room between diff pumpkin and driver's side spring mount.

What are you hoping to gain?
Is it just big lift?

Have seen it done on 80 series, filpped arms and X link. Custom 4x4 mag. Is on the cover.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

not worth doing on a patrol, there is too much in the way. 80 are easy to do but dont bother with a nissan
turbos are nice but i'd rather be blown
Posts: 78
Joined: Tue Jun 16, 2009 5:36 pm
Location: NSW Queanbeyan

Post by young pup »

ok yeh i saw that magazine yesterday. i was just looking for more flex out of the front and something a bit different.
young and doesnt know any better, thats my excuse any way.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest