Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 sieries diffs

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

60 sieries diffs

Post by ZOOK60 »

im going to put land crusier diffs under my wt zook . just wondering how to adapt the drive shalts . and also the steering ? please dont ramble on about wich diff is better and how suzuki diffs will be good enough for diferent size tyres . im just after some advice on how to get them under there . thanks
P.E.T.A
People eating tasty animals.
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

do u know what you are doin for brakelines?willl they bolt up?

do a 60 have a highsteer setup that u could buy? id assume they would

dunno bout drive shafts? id say use the 60s with some sort of spacer like what "rockrat" off pirate makes for toy to zuk


what size tyres do u think u r goin to run?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

i think they come with high steer setup . i havnt got them yet. i am going to put the back in first cause it will be easier . im going to run the standard split rims to keep the width down till i work out what im doing flair wise.
P.E.T.A
People eating tasty animals.
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

we make an adapter to use a toyota cardan joint in a zook. I will get a pic of it today.
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

sick! 60 series diffs are pretty good

take photos as you go
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: 60 sieries diffs

Post by Guy »

jake lawson wrote:im going to put land crusier diffs under my wt zook . just wondering how to adapt the drive shalts . and also the steering ? please dont ramble on about wich diff is better and how suzuki diffs will be good enough for diferent size tyres . im just after some advice on how to get them under there . thanks


What size rubber you planning to run .. thats some beef under a Zuk ..

(I am seriously looking for MQ diffs for mine so I can run 35's to 37's with impunity :twisted: ... )
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: 60 sieries diffs

Post by greg »

love_mud wrote:(I am seriously looking for MQ diffs for mine so I can run 35's to 37's with impunity :twisted: ... )


Immunity?

edit: bold fix :oops:
DMA Founding Member #1 - Now Retired
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Re: 60 sieries diffs

Post by grimbo »

greg wrote:
love_mud wrote:(I am seriously looking for MQ diffs for mine so I can run 35's to 37's with impunity :twisted: ... )


Immunity?

edit: bold fix :oops:


Impunity being exempt from punishment or from injury as consequence of act

here endeth the lesson :armsup:
Ransom note = demand + collage
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

im·pu·ni·ty ( P ) Pronunciation Key (m-pyn-t)
n. pl. im·pu·ni·ties
Exemption from punishment, penalty, or harm.


without breaking stuff or wearing out bearings eh guy?
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

N*A*M wrote:
im·pu·ni·ty ( P ) Pronunciation Key (m-pyn-t)
n. pl. im·pu·ni·ties
Exemption from punishment, penalty, or harm.


without breaking stuff or wearing out bearings eh guy?


too slow :finger:
Ransom note = demand + collage
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: 60 sieries diffs

Post by greg »

grimbo wrote:Impunity being exempt from punishment or from injury as consequence of act

here endeth the lesson :armsup:


I was going by this... i.e. Driving with mass agression - which is pretty similar to how be drives anyway...
DMA Founding Member #1 - Now Retired
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

you can put hilux hi steer arms on to TLC60 diffs
they also use the same CV so you can upgrade them too
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

how do the 60 series stuff compare size and strength wise to the hilux stuff
Ransom note = demand + collage
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

front end is pretty similar

front short side inner = fj40 inner
front long side inner = hilux inner

full float rears available
R&P is bigger
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

i have a cardinal front drive shaft in the garage . the good thing about these diffs is the back is offset same as zook ones .planning of running 35s witha exstended weelbase .sick off doing wheelbearing i want to built it tuffer so i dont have to worry all the time about things breaking. on my last zook i did two wheel bearings runnig 31s both times the whole axle came and out lost all brakes not fun at all
P.E.T.A
People eating tasty animals.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

jake lawson wrote:on my last zook i did two wheel bearings runnig 31s both times the whole axle came and out lost all brakes not fun at all


I think that has probably more to do with maintenancs than anything else. i have run massively offset rims on n/t diffs with 34" swampers and have had to change 2 bearings in 4 years and that is with a lot of mud and water driving.
Ransom note = demand + collage
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Have you thought about diff clearance issues ?

I run the 60 series diffs under my 40 series with 38" TSLs and I beleive NAM had the same diff clearance on 34s ;)

Something to think about.

Having said that they are very strong. They handle abuse from a 1.8 ton rig with a V8 and 38s. So I am sure they will last forever on a Zook with 35s :armsup:
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

guess jake better get some 38s :D

clearance isn't everything but it helps i guess
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

I am also planing on fitting a v6 at the end of the year so need the strength . Id rather over engineer it than keep breaking stuff and end up doing the conversion anyway. Nothing like gatting stuck i the middle of nowhere
P.E.T.A
People eating tasty animals.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

jake lawson wrote:I am also planing on fitting a v6 at the end of the year so need the strength . Id rather over engineer it than keep breaking stuff and end up doing the conversion anyway. Nothing like gatting stuck i the middle of nowhere


With a V6 and big diffs - perhaps somewhere else worth looking at strength issues would be the chassis?
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests