Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4runner Handbrake into Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 259
Joined: Mon Dec 03, 2007 2:40 pm
Location: geelong

4runner Handbrake into Hilux

Post by dillza_69 »

im sure its been covered but i cant find anything, even if i search using google.

What is involved? I have done a 3rz conversion and the exhaust has melted the handbrake cable. From the 4runner i only want to use the lever and the cable that runs to the middle of the car, is this possible?

If i am going about this the wrong way, what have other people who have done 3rz conversion done about the handbrake cable?
Top
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

hey mate,
i got a '84 4runner and a '85 single cab lux.
I took the handbrake cable off the lux and put it on the 4runner. The hilux cable itself was too long so i had to get wire rope clamps to make it shorter. So if your putting a 4runner handbrake into a lux then it wud be too short.. Unless yours is a different year model to mine and they changed..
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Top
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

extractors stop this happening. other than that the v6 surf assembley, i belive u only need the front half back to the centre bearing x member
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Top
Posts: 30
Joined: Sun May 28, 2006 4:05 pm
Location: NW Tas

Post by vrod »

this is a common mod for ingine swaps. but it looks like mine was modified to sit on the inside of the firewall. not sure if this is easier or not tho
91 Surf
1UZ, auto, BL, BJ Spacers, Cruiser coils, 33x12.5 Khumo KL71 and some other stuff
Top
Posts: 259
Joined: Mon Dec 03, 2007 2:40 pm
Location: geelong

Post by dillza_69 »

Rory wrote:extractors stop this happening. other than that the v6 surf assembley, i belive u only need the front half back to the centre bearing x member
that sounds like what i want, does the surf cable run down the inside of the firewall? And what model surf should i be looking for?
Top
Posts: 30
Joined: Sun May 28, 2006 4:05 pm
Location: NW Tas

Post by vrod »

im pretty sure they are in v6 4runners
91 Surf
1UZ, auto, BL, BJ Spacers, Cruiser coils, 33x12.5 Khumo KL71 and some other stuff
Top
Posts: 259
Joined: Mon Dec 03, 2007 2:40 pm
Location: geelong

Post by dillza_69 »

that is what i thought but when i rang a wrecker they said the cable ran down the outside of the firewall of the 4runner they had there, it might not have been a v6 though. I will look into it.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

vrod wrote:im pretty sure they are in v6 4runners
Correct. It is only the V6 4 runner that had this set up.
Top
Posts: 259
Joined: Mon Dec 03, 2007 2:40 pm
Location: geelong

Post by dillza_69 »

I have found a v6 4runner, I'm going to look at it tomorrow
Top
Posts: 47
Joined: Wed Oct 20, 2004 7:50 pm
Location: brisbane

Post by madmont »

The pulley for the handbrake on my 1999 RZN169 is in the cabin
Top
Posts: 96
Joined: Wed Apr 18, 2007 1:20 pm
Location: Frankston

Post by smaddock »

For my 3rz conversion into a 22R 4runner I used a V6 4runner handbrake, has the pulley on the inside of the firewall. I melted mine initially too :)
Top
Posts: 259
Joined: Mon Dec 03, 2007 2:40 pm
Location: geelong

Post by dillza_69 »

yep got one out of a v6 4runner. Cheers for all the reply's
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests