ive got a 92 feroza II sxp widetrack.
and apparently there is a way of raising the torsion bars?
i am not entirely sure how to do this, as my bigger then stock tyres are rubbin against the mud guard..
anyone care to share if its easy doing urself, or better off gettin someone to do it for me?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
torsion bars.
Moderator: Tiny
Whilst I understand the urge to wind up the bars as an easy fix to clearance - things still could touch ( mine did..... hard )
It will hurt your off road capability BADLY by removing what little droop travel stock Feroza's have. Body lift is a much better solution as it doesn't affect droop travel and raises the front and rear equally ( if you decide that's what your after ).
If its a road only car then who cares........ but if you actually get it dirty then its not a clever option. Quick - yes, Cheap - yes, Effective NO
There will be lots of posts on this area if you have a search.
It will hurt your off road capability BADLY by removing what little droop travel stock Feroza's have. Body lift is a much better solution as it doesn't affect droop travel and raises the front and rear equally ( if you decide that's what your after ).
If its a road only car then who cares........ but if you actually get it dirty then its not a clever option. Quick - yes, Cheap - yes, Effective NO
There will be lots of posts on this area if you have a search.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
I did mine with not to long ago. Jacked up the front, and cranked those bad boys rite up!
Nearly shattered my spine going down my drive way. If you do it to high u have absolutely no suspension in the front!
And cornering at any speed over 10Kms means 3 wheel action!
If u do it make sure you do it while the wheels are on the ground.
Nearly shattered my spine going down my drive way. If you do it to high u have absolutely no suspension in the front!
And cornering at any speed over 10Kms means 3 wheel action!
If u do it make sure you do it while the wheels are on the ground.
I got a sweater for Christmas... I wanted a screamer or a moaner!
wound mine 2" when i first got the Fezora ...but like everyone else has noted .. the 2 inches of lift dosnt outweigh the loss of down travel, my Fez handled worse off road, I ended up running 30" M/T's and doing a 2" body lift, this gave me 1.5 inch lift at the diffs (going from stock 27" to 30" tyres) and the 2" body lift gave me the clearance to run the bigger tyres and still had the somewhat limited (but original) down travel at the front. went way, way better in that configuration
_________________
1988 LWB ,IFS, LSD, POS, PAJ, 31" M/T's on bling rims, Snorkel, 2" Lift ,new shocks ,XD9000 winch
1988 LWB ,IFS, LSD, POS, PAJ, 31" M/T's on bling rims, Snorkel, 2" Lift ,new shocks ,XD9000 winch
Who is online
Users browsing this forum: No registered users and 12 guests