Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1HZ smoke screw

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 106
Joined: Sun Jul 08, 2007 3:11 pm
Location: CoffsHarbour

1HZ smoke screw

Post by Stoive »

time to fuel up the 1H, can someone please describe to me or post a picture as to the location of the overall fuel mix screw on a 1HZ injector pump. its on a 93 model HZJ80 motor (in a 40 shorty :twisted: )

i know about all the exhaust temps and too much boost and fuel etc bla bla disclaimer disclaimer
i just wanna have a crack at it myself

cheers.
Top
Posts: 227
Joined: Thu Dec 18, 2008 7:51 am
Location: Qld

Post by crunk81us »

I also am interested in this for my 100 series.
Top
Posts: 128
Joined: Mon Oct 23, 2006 5:29 pm
Location: Melbourne

Post by rezpkt »

It is just above the injector lines. You wind it IN towards the engine to increase fuel, start off in small increments as every pump is different. You really do need an EGT gauge to monitor and give you an idea of what is happening.

I highlighted my original position with a white paint marker and a blade before making any adjustments.
Here's a pic;

Image

Cheers, Glen
Team: Cause For Concern
http://www.offroad80s.com
Top
Posts: 106
Joined: Sun Jul 08, 2007 3:11 pm
Location: CoffsHarbour

Post by Stoive »

cheers, appreciated. thought it was that one, just unsure as my last engine was soo different
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests