Snorkel head (air ram) to suit 4" snorkel

Post by **iamgq** » Fri Jul 17, 2009 9:58 pm

Hi, I am looking for a snorkel head for a 4" snorkel. Both Safari and Airtec are too small. Does anybody know where to get one?

Fri Jul 17, 2009 10:12 pm

truck spares shop

4 inch snorkle head

Post by **MarkR** » Sun Jul 19, 2009 12:05 pm

its aford not a nissan wrote:truck spares shop

4 inch snorkle head

Is that donaldson FPG air box the 8.35" housing diameter ? Do you use the inner safety filter in addition to the outer filter?

Sun Jul 19, 2009 5:33 pm

nah i only use the main filter , i have seen a bobcat with the main filter totally ckockers with dirt and the safety filter still looked like new so i figured it wasnt needed

i think it is the donaldson 8 inch air box but cant remember

Post by **garth** » Mon Jul 20, 2009 10:06 am

Gudday "its a ford not a nissan"

Any chance of a part number/company name where its from etc mate, you got exactly what I need there!

regards garth

Mon Jul 20, 2009 12:33 pm

all parts were sourced from Queensland Diesel Spares , i cant remember the part nos. as it was too long ago and thrown out all the reciepts

Post by **garth** » Mon Jul 20, 2009 2:25 pm

Thats all I need, thanks...and for further info for others they are approx $140.00 Kiwi. part number H008154

regards garth

Post by **B.D.R** » Mon Jul 20, 2009 4:45 pm

I've got one floating around in the shed i think.

I'll have a look for you

Post by **garth** » Tue Jul 21, 2009 10:12 am

Gudday,

That would be much appreciated "B.D.R" .....

regards Garth

Post by **shanfab** » Tue Mar 23, 2010 6:21 am

just to update an old thread ,
I've just made a 4" snorkel to my shorty and fitted a Navara Air ram.
I had to stuff around a bit to make it fit , but I think it turned out OK .

and one of the air box as well

Post by **sudso** » Tue Mar 23, 2010 7:20 pm

I can get Airflow ram heads. They make ram heads for trucks too so name your size (or rather, the actual O/D of your snorkel pipe). Can get adaptor sleeves too for odd sizes.

Post by **str8up** » Tue Mar 23, 2010 7:51 pm

shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?

Post by **sudso** » Tue Mar 23, 2010 8:16 pm

str8up wrote:shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?

Looks like a factory one and no it cant be 4" as it goes inside the 4" tube.

Post by **sudso** » Tue Mar 23, 2010 8:18 pm

str8up wrote:shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?

Looks like a factory one and no it cant be 4" as it goes inside the 4" tube.

Post by **shanfab** » Tue Mar 23, 2010 11:11 pm

sudso wrote:
str8up wrote:shanfab, like the look of the air ram head, what model navara is it off and is it much mucking about? and it is 4"?
Looks like a factory one and no it cant be 4" as it goes inside the 4" tube.

it's not to bad to do . the OD of the Factory navara air ram is about 94mm.
All I did was rolled a ring that was a tight fit in the ID or the air ram . then another one that went over the outside of the air ram ( prob dosn't make much sence , Sorry )
the outer ring was left unwelded to that when you put a clamp on the outside of the 4" snorkel the second ring can pull up tight against the inner one .
oh and the material thickness was about 2mm .

Post by **Davo812** » Wed Mar 24, 2010 3:05 pm

shanfab wrote:just to update an old thread ,
I've just made a 4" snorkel to my shorty and fitted a Navara Air ram.
I had to stuff around a bit to make it fit , but I think it turned out OK .

and one of the air box as well

i like this but needs to be painted black

Post by **gq351** » Wed Mar 24, 2010 5:01 pm

COBURG TRUCK PARTS... hume hwy sommerton vic 9308 0088

Outer Limits 4x4 Board

Snorkel head (air ram) to suit 4" snorkel

Snorkel head (air ram) to suit 4" snorkel

Who is online