Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Installing a GME TX 3600 UHF into BT50

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 7
Joined: Tue Sep 23, 2008 2:34 pm
Location: Townsville

Installing a GME TX 3600 UHF into BT50

Post by TSN08 »

I've just aquired a GME TX 3600 UHF and I'm having some dramas deciding where to install it in my BT50. I want it out of the way but it seems to be too big for the console next to the lighters, unless I take the bracket off and use double sided tape to hold it in position. The problem with this is that the speaker will then be blocked off. I suppose I could put an external speaker there but not sure where I'd put that then. The guys at TJM were less than helpful. Does anyone have any suggestions or photos of ways they have fitted theirs?
Top
Posts: 17
Joined: Thu Oct 25, 2007 9:07 am
Location: Brisneyland

Post by Minas #99 »

i put mine in that little spot it's a tight fit but it will go.
once in, it does not affect the speaker in any way but apart from that there really isn't anywhere practicle unless you want to screw it in the dash....
don't laugh ive seen it done before :roll:
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 0 guests