Is there anything wrong with welding 25mmx25mm angle 5mm thick to the underside of the diff?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diff lamination
diff lamination
99 mdl GU 2.8td Rock Hoppers 3"lift, Q78 Swampers, Cheezy rock slides
Re: diff lamination
If you are going to weld that on the diff tube youl need to watch how much heat you put into the welds. its best if you strip the housing and get it done right or bend up some steel to suit the profile of the housing.GIVEITABIT wrote:Is there anything wrong with welding 25mmx25mm angle 5mm thick to the underside of the diff?
cheers
Who is online
Users browsing this forum: No registered users and 18 guests