Gday guys, I know alot of people here are running them and also fit them. But mine is playing up and I need some advice on what the problem is.
Poroblem 1. Its an auto 80 series and when driving at 100kph and then have the accelerator somewhere between accel and engine braking there is a grinding and vibrating noise coming from the transfer. (Ive redone the entire front diff and uni's on drive shaft)
Problem 2. When I purchased the truck it was sold to me with 45% rockhopper reduction gears. But when I put it in low range it just feels like a normal low range. But sometimes when I stop (eg. at the drive through the other night) high range in D. I take my foot off the brake and instead of wanting to pull away by itself it just sits there and when I try to accelerate it feels like its in rockcrawler gears (real slow).. Im worried that 1 day it might decide to do it when Im doing 100 and cause an accident.
Anyone else had these problems? Or know what it is before I go pulling it all apart.
Cheers BD
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 auto and rock crawler gears problem.
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 3 guests