Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3/4 elliptic + foroza springs + tilted rear shock Q's

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

3/4 elliptic + foroza springs + tilted rear shock Q's

Post by 31zook »

Im thinking about these law and as long as you can get this engineered i can't see a problem with it. Im thinking about doing this and a full RUF on my lwb but try to keep it about standard height. Do un pinned 3/4 elliptic pig root wores than whacky shackles? How much longer are foroza springs, 10inches i think, is the axle placement in the center and are they 50mm wide. I only heard about this mod, but after doing a ruf im pretty keen to try some longer leaves in the rear :D do you need to run control arms with an elliptic? and why is it called an elliptic? and is 8inch's what liam (of BBM) worked out to be the perfect distance for a tilted rear shock?
These are from the builds of GRPABT1 and zookprojectfnq
Image
Image
Image
Image
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

i hate typing things twice......................


http://www.auszookers.com/index.php?nam ... pic&t=5734
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests