anyone used these lift kits

[GU-ish]

as the name says... was looking on fleebay and found these.
http://cgi.ebay.com.au/4WD-SUSPENSION-4 ... 7C294%3A50

any1 used them? or thoughts on them.
thanks

[bogged]

personally I'd rather spend a bit more, and get something I knew...

[luxoflex]

You would be much better off going to a suspension specialist to get the right set up for your rig.

[GU-ish]

yeh thought i would just see if any1 else had used them.
are there any places online you can buy from apart from Suspstuff. ??

[vt 98]

springs are supposedly dobinsons so great gear if they are real dobinsons

[SuperiorEngineering]

great gear , or great coils ??
Who's shocks , whos panhards,
I normally dont say anything about others manufacturers gear but first problem i see is the panhards use poly bushes which will fail after the first few offroad drives, the second problem is single nut panhards are prone to coming undone ( see it all the time ) , third they look to be mild steel round bar buy the amount of bend they have put in, 4th check if it is a screw cut thread or a dodgy rolled thread.
Contact the seller and ask them whos gear it actually is , what warranty they have, what they are manufactured from.
If they cant tell you, well you make the decision if it"s worth your hard earned money.
Dobinsons are good coils but that does not make the whole kit great.

[GU-ish]

great gear , or great coils ??
Who's shocks , whos panhards,
I normally dont say anything about others manufacturers gear but first problem i see is the panhards use poly bushes which will fail after the first few offroad drives, the second problem is single nut panhards are prone to coming undone ( see it all the time ) , third they look to be mild steel round bar buy the amount of bend they have put in, 4th check if it is a screw cut thread or a dodgy rolled thread.
Contact the seller and ask them whos gear it actually is , what warranty they have, what they are manufactured from.
If they cant tell you, well you make the decision if it"s worth your hard earned money.
Dobinsons are good coils but that does not make the whole kit great.

thanks for the tips there, i didnt think or no that much in depth about all the panards etc... will definitly go with the better brand stuff save up some more...

[coxy321]

great gear , or great coils ??
Who's shocks , whos panhards,
I normally dont say anything about others manufacturers gear but first problem i see is the panhards use poly bushes which will fail after the first few offroad drives, the second problem is single nut panhards are prone to coming undone ( see it all the time ) , third they look to be mild steel round bar buy the amount of bend they have put in, 4th check if it is a screw cut thread or a dodgy rolled thread.
Contact the seller and ask them whos gear it actually is , what warranty they have, what they are manufactured from.
If they cant tell you, well you make the decision if it"s worth your hard earned money.
Dobinsons are good coils but that does not make the whole kit great.

thanks for the tips there, i didnt think or no that much in depth about all the panards etc... will definitly go with the better brand stuff save up some more...

Give Shane at Suspension Stuff a call. He'll hook you up with the good gear, at a good price too!

[Dyls GQ]

Dude are you still goin to put the drop boxes in like we talked about, rather than use the offset bushes or did ya change ya mind?

[GU-ish]

yes drop boxes, but i think they hang down from the chassis a bit, otherwise caster plates?

[nastytroll]

run rubber caster bushes for 2" only, go boxes or some brand of drop arm. Plate drive poorly in comparison.

[Dyls GQ]

Yeah Either Drop Arms Like Mine Because No Sh*t Hangs Down. But Im Sure You Dont Want To Spend That Much Dosh So Drop Boxes Are The Cheaper Option..Plus Ya New Buddy Mill Makes Em Dont He?

[Weiner]

Go drop boxes, make it handle like new again.

[coxy321]

Go drop boxes, make it handle like new again.

x2