Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux front axle seal

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Hilux front axle seal

Post by Willy Hilux »

Does anyone know the size of the front axle seal that sits inside the knuckle on a solid axle setup???

I want to make up a seal drift while I'm at work to make the job easier in the future of seal replacment.

Is there a maket for these??
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

Re: Hilux front axle seal

Post by DR Frankenstine »

Willy Hilux wrote:Does anyone know the size of the front axle seal that sits inside the knuckle on a solid axle setup???

I want to make up a seal drift while I'm at work to make the job easier in the future of seal replacment.

Is there a maket for these??
Just use a socket and extension bar they go in real easy. I wouldnt buy a drift if there was a specific one available. Which there probably is.
Remember some days your the pigeon and other days your the statue
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

?? go buy one there like 5bucks @ ripco
DR Frankenstine wrote: I wouldnt buy a drift if there was a specific one available. Which there probably is.
Bearing race and seal instaler would probaly be the "proper" tool for it but the socket does the trick.
plenty of parts on the bench
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Doesn't look like anyone can help out with the sizes. I like to have one as my knuckles are damaged from cv's exploding and if ya got to do one in the bush I would like the the seal to go in square the first time.

Look on the marlin crawler site - he has them for sale. Why buy when I get paid to make it. :D Also it will be out of S/Steel. :armsup:
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

the ed of the axel seal is 44mm, so probably about 42mm for your tool should be ok.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

now you can make an extra one and send it down for my help :lol:
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Cheers, Getting a few spare seals tomorrow and will make the tool to suit. Will be makn up a few as I've got a few mates with lux's.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

All done. Will test it out Wednesday to see if they are worth making. Looks like it will work.

I made it so the seal will sit on a stub then pushed from behind to keep it square when tapped in.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 250
Joined: Tue Jul 24, 2007 5:03 pm
Location: Toowoomba, Qld.

Post by stampy4x4 »

There's also this ....is it similar to what you made?

http://www.4x4wire.com/toyota/tech/quic ... ealdriver/
gute Reise!

4ROCs Offroad
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

More like this one but out of s/steel. :D

http://www.marlincrawler.com/hardware-t ... -installer
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Tool worked very well.

Seal size is 33 x 44 x 8 If anyone wanted to know.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests