Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Noob live axle shock location Q

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Noob live axle shock location Q

Post by TheOtherLeft »

What's with the location of shocks on live axles being one in front and one behind?

I've noticed Hilux's have this setup and wonder why they do that. Is it to prevent axle wrap?
Top
Posts: 13
Joined: Thu Jun 02, 2005 7:21 pm
Location: sydney

Post by bj 666 »

Yeah afaik its to help prevent axle wrap on the sprung over diff setup in hilux's. I know a few other manufacturers use this setup also but cant remember who right now.

It's adequate in a fairly stock setup but of course with softer springs more power etc its not enough so a trac bar would be required.
You're Jamaican??.. I thought you were some kind of outer space potato man?!?!
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

They won't prevent axle wrap, just damp out the humping action from it.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

I've been under a few Navaras with the front/back setup.

It is to contain the massive ZD30 powerbeast.
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

the older rangies used this setup on the rear.
I once had a rangie owner tell me that landrover used it to increase wheel travel. at the time i was inclined not to believe anything he said, considering some of his other comments, but thinking about it, if set up correctly it should'nt hinder wheel travel.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 107 guests