Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clicking/grinding noise from front diff? Help?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Clicking/grinding noise from front diff? Help?

Post by ethann »

Goodmorning,

Well on Friday night I got a phone call @ 12am (So technically Saturday morning haha), From a mate stuck and needing a hand. Went up there pulled him out heading out of the place I said to him 'Wonder if I can climb over those rocks?', Locked the hubs back in and started cruisin' over them, The front got to the highest point then dropped down and a log went between the front wheel and the guard.
Couldn't move forwards or backwards so I put my locker on and started to move then it started making like a clicking/grinding kind of sound?
My mate pulled me out and I thought I broke my cv, But turning full lock side to side no noise?
So I unlocked the hubs and drove home. Got up early Saturday morning and went to try to work it out, Come up to a log, In 4x4 it'll click/grind with no drive to the front wheels. Put the locker on and there will be drive to the front left wheel but it'll still click on the right side.

I thought it could of had something to do with the drive clutch or manual locking hub, Took the right one off and it looked like it hadn't of been engaging properly and started grinding the gears off.
Rounded up another off a mate and it looked better and stuff so I put that on tried it again and still the same thing.

Has got me stumped now with out taking the centre out?

Could it have something to do with the locker or something?
It's still all under warrenty so I just don't wanna open the centre up and void anything, I'd rather take it back and get tjm to check it out?

Any ideas?
Team Lock n load.
www.facebook.com/locknloadaustralia
Top
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Post by ethann »

Just rang TJM and the guy said that from what I told him it deffintly sounds like a CV.
So I may just be on the hunt for a CV.

I need to pull it apart and check the cv really.
Team Lock n load.
www.facebook.com/locknloadaustralia
Top
Posts: 154
Joined: Sun May 16, 2004 3:54 pm
Location: anchorage,alaska

Post by sledheadak »

never mind just saw you had already changed the hub.
scars are like tattoos ony with better stories
think snow!!!!!!!!!!!!!!
Autokrafters
Top
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Post by ethann »

Cvs are fine, Axles are fine.

Whats this, A grinding noise coming from an ARB locker?

Centres out atm, Taking it back to tjm tomorrow.
Team Lock n load.
www.facebook.com/locknloadaustralia
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Just check that your engine mounts aren't broken as well.
Top
Posts: 16
Joined: Thu Dec 20, 2007 9:32 am
Location: Newcastle

Post by searlie »

how did you go mate? are they replacing/reparing it under Warrenty?
Top
Posts: 129
Joined: Sun Jun 29, 2008 4:10 pm
Location: Melbourne, Victoria, Australia

Post by striga22 »

it might be your diff center bearings they might of came loose or i have heard that some times the bolts in the crown wheel works them self loose.
need some plumbing done? cashies top quality job for cheaper south east melbourne Daniel 0423771198
Top
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Post by ethann »

searlie wrote:how did you go mate? are they replacing/reparing it under Warrenty?
Well I took the centre out and had a look over it, Couldn't really see much.
So I took it back the next morning, Took it into the work shop and showed them what was happening. (With my cv's and axles to show them that they were fine).

And now I pretty much have to wait for a phone call, Apprently the centre may have to be shipped off to Melbourne to be tested or something =(.

And my GQ being my daily I sourced a new centre for the front then I could atleast drive around.

Picked up a complete front diff/housing minus the manual locking hubs, (Rotors, Calipers, Axles and cvs) for $180.
Same ratio as mine, So I've just got the open in the front until I hear a reply from TJM.

Will let use know how I go.
Team Lock n load.
www.facebook.com/locknloadaustralia
Top
Posts: 16
Joined: Thu Dec 20, 2007 9:32 am
Location: Newcastle

Post by searlie »

good luck with it hope all goes well for you
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests