Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

35" Muddys 87 Pajero

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 21
Joined: Wed Apr 15, 2009 9:13 pm
Location: australia

35" Muddys 87 Pajero

Post by paj302 »

Image Image

Trial Run With Some 35" Muddys, Was Running 33" Muddys. The 35" Clear No Worries At All, I Am Running a 2" Body Lift And 2" Suspension Lift Though.
90 LWB PAJERO 3.0 V6 Manual -35" Muddys 3" Body Lift 2" Suspension Lift custom bars front and rear. Custom side rails
Top
Posts: 212
Joined: Sun Apr 19, 2009 8:40 am
Location: Branxton

Post by phat-customs »

How DID U find the fuel consumption with the 33's??? what motor U runnin?
Top
Posts: 21
Joined: Wed Apr 15, 2009 9:13 pm
Location: australia

Post by paj302 »

Fuel consumption was down a little when changed up from 31's with old motor(4cyl) , is on straight gas so only dropped about 40km's a tank, slight power loss was noticed, now running 2wd 302 v8 so no problems with power now
90 LWB PAJERO 3.0 V6 Manual -35" Muddys 3" Body Lift 2" Suspension Lift custom bars front and rear. Custom side rails
Top
Posts: 132
Joined: Tue Oct 11, 2005 9:13 pm
Location: Springfield

Post by big wheel sigma »

Hi mate, what 302 motor did you use, a windsor or clevo, and what gearbox, transfer, tail shafts and diffs did you use. I have an NJ and want to power up a little and do a SAS, I can get some patrol axles for a good price and was going to use them.
Thanks Jeff
Series 1 Disco 2 Door
33" Maxxis Mudders
35" Silverstone Extreme
2" Spring Lift
2" Body Lift
Warn HiMount Winch
Top
Posts: 21
Joined: Wed Apr 15, 2009 9:13 pm
Location: australia

Post by paj302 »

Using A 302 Cleveland, Running A C10 Auto, Modified Ford 9" LSD Diff, And Ford Shortened Tailshaft. No Front Diff, Only Running As 2wd As Thats All I Needed For What I Use It For, Goes Anywhere Anyway.
90 LWB PAJERO 3.0 V6 Manual -35" Muddys 3" Body Lift 2" Suspension Lift custom bars front and rear. Custom side rails
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests