Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2uzfe into 80 has it been done

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 74
Joined: Wed Apr 15, 2009 10:11 am
Location: Rockhampton

2uzfe into 80 has it been done

Post by td lux »

2uzfe into 80 has it been done what are the dramas with doing this
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

can't say i have seen it done, Have seen one in a supra with 2 superchargers and autronic ECU :lol:
Main issue i can think of is the wiring for the un-experienced. To use the factory computer the factory transponder immobiliser would need to be wire up aswell. Its possible, just a bit tricky.

Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 35
Joined: Sun Mar 23, 2008 4:55 pm
Location: traralgon

Post by ferg640 »

I didn't really read through it but Im guessing it will be usefull.

http://forum.ih8mud.com/80-series-tech/ ... gress.html
Top
Posts: 23
Joined: Wed Mar 22, 2006 7:37 pm
Location: SE Suburbs Melbourne

Post by tonkatuf »

Auto or manual?
If you have the A442 Auto you need a bell housing from the early 100 series V8.
The main dramas will be wiring the engine in but if you use the computer and wiring from the early 100 series it should be an easier swap.
Top
Posts: 74
Joined: Wed Apr 15, 2009 10:11 am
Location: Rockhampton

Post by td lux »

engine comes with auto box and tranny
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

They have imobilisers so you will need the key/ignition lock/wiring. Then you put the 100 ignition under your dash with key turned on all the time, and wire into that with yours.
Andrew
Confucious say...man who argue with idiot, worserer himself
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 44 guests