Just a quick question.
Did they increase the size of the wheel arches (width) in later year model ferozas?
I see one or two a week and I swear some of them have bigger arches.
Might be paranoid, who knows
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wheel arches
Moderator: Tiny
Sheetmetal is identical between narrow and wide.
Bolt on widetrack flares actually make the width issue worse as you cant cut them away like the sheetmetal as theres nothing to hold up the rear of the flare.
31"s touch hard enough to damage the guargs quite badly if you use hard... anything more is a BIG problem.
You need flares that are longer to solve the issue - basically right back to the leading edge of the front door.
Bolt on widetrack flares actually make the width issue worse as you cant cut them away like the sheetmetal as theres nothing to hold up the rear of the flare.
31"s touch hard enough to damage the guargs quite badly if you use hard... anything more is a BIG problem.
You need flares that are longer to solve the issue - basically right back to the leading edge of the front door.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 16 guests