Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Getting codes from Auto Trans

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 34
Joined: Wed May 28, 2008 4:25 pm
Location: Perth W.A

Getting codes from Auto Trans

Post by GQ4X4 »

Guys, there was a thread on here which I have read before but fo rthe life of me i cant fucking find it! I need to find the procedure to getting the transmisison fault codes for my 94 GQ.

The issue being that it is stuck in limp mode, it used to do it but it would always come out of it. I have replaced the TCU and TPS along with having the box serviced which I was told there was no material or bits of shit in the pan and the fluid was only slightly burnt smelling..his words not mine...also the mode switch POWER light will not come on! which i need tto get the codes, the switch still works as i tested it as per the gregorys manual i have...any help please! haha
Top
Posts: 34
Joined: Wed May 28, 2008 4:25 pm
Location: Perth W.A

Post by GQ4X4 »

alternatively, can someone email/direct me where to find the section from tha nissan manual regarding the auto trans, the manual i have (not nissan) covers fark all.

On another note, i managed to bust the mode switch so i need to buy a new one...70 dollars from mr nissan thankyou very much!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 112 guests