Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cranked rear arms

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 166
Joined: Tue Sep 28, 2004 8:12 pm

Cranked rear arms

Post by disco95 »

Hi guys, I'm looking for specs to get my local steel man to crank and strengthen my rear arms for me. Does anyone here have any specs for lengths and angles to suit a D1 with a 3" spring lift?
Cheers,
Sean.
Top
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

I just cranked mine 2" then braced the under side with some 10mm X 30mm plate worked well, still using them after 2 years..



Jeff
rover money pit on mogs !!!
Top
Posts: 166
Joined: Tue Sep 28, 2004 8:12 pm

Post by disco95 »

jbell wrote:I just cranked mine 2" then braced the under side with some 10mm X 30mm plate worked well, still using them after 2 years..



Jeff
So did you just put a bend in them that put the axle end 2" lower than stock? Or were there any other adjustments that had to be made?
I don't want to FUCK my arms.
Top
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

To bend them you need to cut the arm as so the the diff doesnt get pulled in.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 15 guests