Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
if you have the money have a look into pwr radiators. they are used in alot of race cars. i am also setting up a disco for comps... slowly. but thats what i say i will be running
I have a 350 in a 74 RRC. Using a stock RR rad and EL thermos and all is good. Motor is on gas but not worked. Temp gauge runs between 1/4 and 1/3, no more even when crawling.
The stock expansion tank is not quite big enough for a 350, so I'm going to piggy back another one before summer.
race radiaters in dandenong, they did my 2 core aliminium one for my 6.5 chev diesel i had in my old rangie, cost $750.
You'll find it won't be a 5 core one as they don't do them, my 2 core was 80mm thick , the cores are massive. Before that i had a patrol 4 core one in and it did sweet f a
o right i was told i'll need even 1a 4core are a5 core 750 thats ok i'll go order one today thanks for all your help adam. I'll try to get some pics up of car when i figure how to do it
Get a desert cooler radiator. i just got one for my rover with 5ltr and it doesnt get hot at all. cost 750. just make sure it is spot on when you pick it up cuz they didnt put the filler hole in mine and i had to do it myself. i had a race radiators one in before this and it split down the side of the tank and core cause they use a ressin to hold it together.
adam big lad wrote:ok that isn't that bad i could make a bigger res shouldn't be too hard. what ya done to your disco?
So far i have put a 4.6 stroker in to be supercharged, 2inch suspension and 2 inch body lift cut guards big rubber flares, 35x 12.5 simex and a fair few other things. still to be done are air lockers, axel upgrade, 4.11 diff gears, ute conversion, coil over suspension the list goes on.... just need to find some holidays to do the work, now i am studying i am pretty broke.
ye i know what ya mean time is what i need as well I've put a worked holden 304 injected in 36 simex's 4 inch suspension koni's done gearbox and all bar work and some roccia flares on from england best flares ever. hopefully will get to race against you in the future
ha ha ye sorry another orange disco sorry company colours!!!
Hopefully will be done this year got to put coilovers in and do roll cage!!
Ye keeping landrover auto just had it rebuilt.
, the cores are massive. Before that i had a patrol 4 core one in and it did sweet f a 
