General Tech Talk
Moderators: toaddog , TWISTY , V8Patrol , Moderators
Posts: 1042 Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY
Post
by SIMMO84 Sun Aug 23, 2009 10:02 am
I removed the engine last night and got the wiring from (but not including) fuse boxes through engine to the computer. Do I need the harness from fuse boxes to the body control module. Its all for engine conversion into hilux.
Posts: 4 Joined: Mon May 18, 2009 9:03 pm
Location: newcastle
Post
by v6zookie Sun Aug 23, 2009 6:48 pm
pull all u can if u got the time saves bying one later if u find out u need it!
Posts: 243 Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville
Post
by Dane Sun Aug 23, 2009 7:14 pm
How do you plan to wire it up? If using the Marks adaptor harness, check their website for details. If using an auto elec, ask him.
Posts: 1042 Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY
Post
by SIMMO84 Sun Aug 23, 2009 7:14 pm
yeah the only reason I havent taken the other one yet is it looks like a real PITA to get it out, might have a look during the week.
Posts: 1042 Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY
Post
by SIMMO84 Sun Aug 23, 2009 7:17 pm
Dane wrote: How do you plan to wire it up? If using the Marks adaptor harness, check their website for details. If using an auto elec, ask him.
Yeah plan to get a harness from marks or elsewhere. will ring them tomorrow and see what they say.
Posts: 1644 Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney
Post
by CWBYUP Sun Aug 23, 2009 10:29 pm
Speak to killalux of here. He is doing a full harness for me at the moment and he's supplying the whole lot.
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
Posts: 1167 Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A
Post
by duncan Mon Aug 24, 2009 1:30 am
Im running a VN wireing harness on a Vs motor works fine but you need the VN computor my sparky didnt use the standard fuse box .
Posts: 1042 Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY
Post
by SIMMO84 Mon Aug 24, 2009 7:49 pm
Spoke to a few people today, seems that I only need the harness from the battery via engine to the computer. Might help others in the future.
Posts: 243 Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville
Post
by Dane Mon Aug 24, 2009 8:08 pm
MAF and/or MAP sensors from the firewall were required on mine.
Posts: 1042 Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY
Post
by SIMMO84 Mon Aug 24, 2009 8:13 pm
Ahh ok will have a look tomorrow, cant remember seeing one there. Is that on the Ecotec aswell?
Posts: 243 Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville
Post
by Dane Mon Aug 24, 2009 8:21 pm
Not sure mate. I used a VP series II and it was a long time ago.
Users browsing this forum: No registered users and 1 guest
