will this rim fits my 105?

Post by **disco4x4** » Fri Aug 28, 2009 3:11 am

Hi,

I have an urgent need for new rims
I could get this ones in IL

I'm using 285X75X16

will those with +60 offset will do the job ?

thanks

Roy

Post by **disco4x4** » Fri Aug 28, 2009 3:22 am

don't LOL me
it will not be Chrome .....

Post by **v840** » Fri Aug 28, 2009 3:41 am

I think they're for the IFS models. IIRC live axle models had zero offset. With +60, you may lose a fair bit of track width and possibly start scrubbing on tie rod ends etc. Wait for a cruiser guru to respond though, I'm only going off memory and it's late.

Post by **dow50r** » Fri Aug 28, 2009 6:48 am

they wont fit solid diff cruisers, et needs to be 0

Post by **disco4x4** » Sat Aug 29, 2009 12:19 am

thanks guys

saved me time & money

any recommendation for a good 16X8 ET 0 rims which are DOT comply ?

Post by **crankycruiser** » Sat Aug 29, 2009 8:18 pm

u can get those same rims with the right offset for 105's. a mate had a set on his 105

Post by **crankycruiser** » Sat Aug 29, 2009 8:20 pm

http://www.tempetyres.com.au/products_c ... rt_no=1661

Post by **GO79** » Mon Aug 31, 2009 12:57 am

they will fit with wheel spacers and you need to take some of the center of the rim out to fit over the hubs and rear axles of the 105 series. the 100 series runs a semi floater axle in the rear so no stick out to hit and no hubs on the front to hit

Post by **disco4x4** » Mon Aug 31, 2009 4:48 am

any off the shelf prodcut that will fit with no spacer or mod. which is also DOT certified ?

Post by **zoook** » Thu Sep 03, 2009 5:16 pm

just buy some steel wheels 16x8 with 0 offset they will fit 65 bucks each everywhere .....

Post by **disco4x4** » Thu Sep 03, 2009 8:25 pm

Zoook,

as I'm based in Israel, can not get them here
would have to import
need to be DOT certified rims
any advice is welcome !!

Post by **mike_nofx** » Thu Sep 03, 2009 9:02 pm

Whats the urgent need?

Whats on there at the moment?

Post by **fester2au** » Thu Sep 03, 2009 9:06 pm

Not sure where you could get them over there but ROH are an Aussie manufacturer of quality wheels and the Impact is a popular 105 wheel as ROH make it for Toyota as well. Toyota call it the Royale and have it fully painted silver, ROH do it with a machined face and silver or black holes. They are approved rims here but not sure if they cover your DOT requirements.

http://www.roh.com.au/4wdsuvseriesimpact.php

They do a few 4wd wheels so maybe an email to them.

Outer Limits 4x4 Board

will this rim fits my 105?

will this rim fits my 105?

Who is online