Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Petrol turbo 80. just stoped

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 25
Joined: Thu Jan 25, 2007 10:01 pm

Petrol turbo 80. just stoped

Post by 80WEPN »

Hey i have a 4.5l 80 series turbo running 13psi, out for drive last night and it just stoped. have power to fuel pump but no spark. the rotar buttun is not spining. i was thinking cam shaft is f@#ked.any other thoughts on this would be great. Also if it is the cam, what would be the best upgrade for it. cheers
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

i would be thinking more like the timing belt. Which if it broke most likely have bent valves aswell.

Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

killalux wrote:i would be thinking more like the timing belt. Which if it broke most likely have bent valves aswell.

Steve
Although it is a vastly different engine, my corrola a few years back did exactly what you have said and as said it was a broken timing belt... If it snapps then the rotor button will not spin causing spark.

But the mechanic told me the engine was lucky and 'free wheeled'... (did not bend any valves)

I would think if it was a cam shaft it would gradually get worse and still run, just run like s**t.

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

unlikely but is the gear on the end of the dizzy (the one you only see if you pull the whole dizzy off) plastic? I have seen one of these fatigue and crack the teeth off and as such rotor not spin.

but another vote for potencial timing belt.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

i was under the impression this engine was chain driven like "most" of the other petrol toyota engines.. i guess you learn something ever day? petrols have never interested me.
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

killalux wrote:i would be thinking more like the timing belt. Which if it broke most likely have bent valves aswell.

Steve
as 1FZ's run a chain this is pretty unlikely....
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

slightly related, i was driving my old civic several years ago, did some hard driving and the car just stopped. it was just the gear on the dizzy. nothing else was wrong. car still turned over just wouldnt fire.
turbos are nice but i'd rather be blown
Top
Posts: 72
Joined: Thu Jan 04, 2007 6:55 pm
Location: Melbourne, VIC

Post by DGS4WD »

1FZ-FE's defiantly run a timing chain and not a belt. I would be removing the rocker cover and having a look as you should be able to see what has happened. Very intertested to find out what has gone wrong, pictures are a must!
Last edited by DGS4WD on Mon Aug 31, 2009 6:17 pm, edited 3 times in total.
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Top
Posts: 25
Joined: Thu Jan 25, 2007 10:01 pm

Post by 80WEPN »

yep it was the timing CHAIN boys. did not f#*k any thing else. sweet as. back in action 2moz. mmm 240RW KW cheers for all replys
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

so i take it that this engine is also a free spinning engine so to speak as there was no valve damage?
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

nice :D did well to break the chain... and no valves

All good jst the way you want it to be..

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Ya cant break these motors....but that the first chain ive heard of thats snapped.....the chain in the tacho will be next if the tyres fry like mine used to :)
Confucious say...man who argue with idiot, worserer himself
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 127 guests