Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nissan gq tailshaft

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 85
Joined: Sat Aug 22, 2009 11:03 pm
Location: sydney

Nissan gq tailshaft

Post by brendo4b »

I need a new tailshaft for my gq patrol but nissan want 1100 for a new one im want to know if a gu or anything newer would fit if not is there anything that can be done to repair this anyone know any good driveline joints ive already tried sydney driveline but they wernt interested
Top
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

Post by waandy »

try wreckers or in for sale section. no real need for a newer shaft as gq driveline is very tough :armsup:
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

i can "reshaft" that one if its just been dammaged
i make my own with 6mm wall ...
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

Not a rare item, only the RB30 and TD28 have different front shaft unis, most wreckers scrap em due to having too many, should cost fruck all.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 85
Joined: Sat Aug 22, 2009 11:03 pm
Location: sydney

Post by brendo4b »

Mousie wrote:i can "reshaft" that one if its just been dammaged
i make my own with 6mm wall ...
Do you replace the slip joint as well what sort of cost would i be looking at thanks for your info mate
Top
Posts: 99
Joined: Fri Jul 11, 2008 7:41 am
Location: MINTO

Post by wyliespatrol »

can a tail shaft be fully reco, ie spline as well?

and also any one know the part no. for a shaft from nissan?

as i also have this problem.

thanks
chris
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 113 guests